commit 78fb9f4236d9077fb343fb5a4e55fe27075e9a1d Author: Greg Kroah-Hartman Date: Mon Aug 10 12:22:47 2015 -0700 Linux 3.10.86 commit 8492fd437ef59a2a2ed2f312466c48f202458faf Author: Fupan Li Date: Tue Aug 4 09:51:21 2015 +0800 efi: fix 32bit kernel boot failed problem using efi Commit 35d5134b7d5a ("x86/efi: Correct EFI boot stub use of code32_start") imported a bug, which will cause 32bit kernel boot failed using efi method. It should use the label's address instead of the value stored in the label to caculate the address of code32_start. Signed-off-by: Fupan Li Reviewed-by: Matt Fleming commit 92eba7ddb962d2c4236edd78bcc66263d934f2e0 Author: Nicholas Bellinger Date: Thu Jul 23 22:30:31 2015 +0000 iscsi-target: Fix iser explicit logout TX kthread leak commit 007d038bdf95ccfe2491d0078be54040d110fd06 upstream. This patch fixes a regression introduced with the following commit in v4.0-rc1 code, where an explicit iser-target logout would result in ->tx_thread_active being incorrectly cleared by the logout post handler, and subsequent TX kthread leak: commit 88dcd2dab5c23b1c9cfc396246d8f476c872f0ca Author: Nicholas Bellinger Date: Thu Feb 26 22:19:15 2015 -0800 iscsi-target: Convert iscsi_thread_set usage to kthread.h To address this bug, change iscsit_logout_post_handler_closesession() and iscsit_logout_post_handler_samecid() to only cmpxchg() on ->tx_thread_active for traditional iscsi/tcp connections. This is required because iscsi/tcp connections are invoking logout post handler logic directly from TX kthread context, while iser connections are invoking logout post handler logic from a seperate workqueue context. Cc: Sagi Grimberg Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman commit 8345c7414c155c06b7cf953820f94e0b3fa83a57 Author: Nicholas Bellinger Date: Wed Jul 22 00:24:09 2015 -0700 iscsi-target: Fix use-after-free during TPG session shutdown commit 417c20a9bdd1e876384127cf096d8ae8b559066c upstream. This patch fixes a use-after-free bug in iscsit_release_sessions_for_tpg() where se_portal_group->session_lock was incorrectly released/re-acquired while walking the active se_portal_group->tpg_sess_list. The can result in a NULL pointer dereference when iscsit_close_session() shutdown happens in the normal path asynchronously to this code, causing a bogus dereference of an already freed list entry to occur. To address this bug, walk the session list checking for the same state as before, but move entries to a local list to avoid dropping the lock while walking the active list. As before, signal using iscsi_session->session_restatement=1 for those list entries to be released locally by iscsit_free_session() code. Reported-by: Sunilkumar Nadumuttlu Cc: Sunilkumar Nadumuttlu Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman commit bde8e916ed7bfbb694792335043938e206636943 Author: Marc-André Lureau Date: Fri Jul 17 15:32:03 2015 +0200 vhost: actually track log eventfd file commit 7932c0bd7740f4cd2aa168d3ce0199e7af7d72d5 upstream. While reviewing vhost log code, I found out that log_file is never set. Note: I haven't tested the change (QEMU doesn't use LOG_FD yet). Signed-off-by: Marc-André Lureau Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman commit 6c3498f9eef9381a5d45d5b2ca23b455a36795c5 Author: Wengang Wang Date: Mon Jul 6 14:35:11 2015 +0800 rds: rds_ib_device.refcount overflow commit 4fabb59449aa44a585b3603ffdadd4c5f4d0c033 upstream. Fixes: 3e0249f9c05c ("RDS/IB: add refcount tracking to struct rds_ib_device") There lacks a dropping on rds_ib_device.refcount in case rds_ib_alloc_fmr failed(mr pool running out). this lead to the refcount overflow. A complain in line 117(see following) is seen. From vmcore: s_ib_rdma_mr_pool_depleted is 2147485544 and rds_ibdev->refcount is -2147475448. That is the evidence the mr pool is used up. so rds_ib_alloc_fmr is very likely to return ERR_PTR(-EAGAIN). 115 void rds_ib_dev_put(struct rds_ib_device *rds_ibdev) 116 { 117 BUG_ON(atomic_read(&rds_ibdev->refcount) <= 0); 118 if (atomic_dec_and_test(&rds_ibdev->refcount)) 119 queue_work(rds_wq, &rds_ibdev->free_work); 120 } fix is to drop refcount when rds_ib_alloc_fmr failed. Signed-off-by: Wengang Wang Reviewed-by: Haggai Eran Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman commit 5eeb26f296b528d9e6f8738a3c87726925bf6237 Author: Zhuang Jin Can Date: Tue Jul 21 17:20:30 2015 +0300 xhci: prevent bus_suspend if SS port resuming in phase 1 commit fac4271d1126c45ceaceb7f4a336317b771eb121 upstream. When the link is just waken, it's in Resume state, and driver sets PLS to U0. This refers to Phase 1. Phase 2 refers to when the link has completed the transition from Resume state to U0. With the fix of xhci: report U3 when link is in resume state, it also exposes an issue that usb3 roothub and controller can suspend right after phase 1, and this causes a hard hang in controller. To fix the issue, we need to prevent usb3 bus suspend if any port is resuming in phase 1. [merge separate USB2 and USB3 port resume checking to one -Mathias] Signed-off-by: Zhuang Jin Can Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman commit 99bcb88e61c399787ae48e3c0a85e024b3c8e668 Author: Zhuang Jin Can Date: Tue Jul 21 17:20:29 2015 +0300 xhci: report U3 when link is in resume state commit 243292a2ad3dc365849b820a64868927168894ac upstream. xhci_hub_report_usb3_link_state() returns pls as U0 when the link is in resume state, and this causes usb core to think the link is in U0 while actually it's in resume state. When usb core transfers control request on the link, it fails with TRB error as the link is not ready for transfer. To fix the issue, report U3 when the link is in resume state, thus usb core knows the link it's not ready for transfer. Signed-off-by: Zhuang Jin Can Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman commit 7e74269b3bb7f226e25ef02b8e61ccd47ebbfff2 Author: Brian Campbell Date: Tue Jul 21 17:20:28 2015 +0300 xhci: Calculate old endpoints correctly on device reset commit 326124a027abc9a7f43f72dc94f6f0f7a55b02b3 upstream. When resetting a device the number of active TTs may need to be corrected by xhci_update_tt_active_eps, but the number of old active endpoints supplied to it was always zero, so the number of TTs and the bandwidth reserved for them was not updated, and could rise unnecessarily. This affected systems using Intel's Patherpoint chipset, which rely on software bandwidth checking. For example, a Lenovo X230 would lose the ability to use ports on the docking station after enough suspend/resume cycles because the bandwidth calculated would rise with every cycle when a suitable device is attached. The correct number of active endpoints is calculated in the same way as in xhci_reserve_bandwidth. Signed-off-by: Brian Campbell Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman commit 76e0de0ab13401b76c5de2f48bd8d4edf809f9a5 Author: Oliver Neukum Date: Mon Jul 6 13:12:32 2015 +0200 usb-storage: ignore ZTE MF 823 card reader in mode 0x1225 commit 5fb2c782f451a4fb9c19c076e2c442839faf0f76 upstream. This device automatically switches itself to another mode (0x1405) unless the specific access pattern of Windows is followed in its initial mode. That makes a dirty unmount of the internal storage devices inevitable if they are mounted. So the card reader of such a device should be ignored, lest an unclean removal become inevitable. This replaces an earlier patch that ignored all LUNs of this device. That patch was overly broad. Signed-off-by: Oliver Neukum Reviewed-by: Lars Melin Signed-off-by: Greg Kroah-Hartman commit 357dafbca56c66e47d3a76f036c47d8b756fe17b Author: Lior Amsalem Date: Tue Jun 30 16:09:49 2015 +0200 ata: pmp: add quirk for Marvell 4140 SATA PMP commit 945b47441d83d2392ac9f984e0267ad521f24268 upstream. This commit adds the necessary quirk to make the Marvell 4140 SATA PMP work properly. This PMP doesn't like SRST on port number 4 (the host port) so this commit marks this port as not supporting SRST. Signed-off-by: Lior Amsalem Reviewed-by: Nadav Haklai Signed-off-by: Thomas Petazzoni Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit 74f412afcff28566ef240dc2a0f0af3994201fad Author: Tejun Heo Date: Wed Jul 22 18:05:53 2015 -0400 blkcg: fix gendisk reference leak in blkg_conf_prep() commit 5f6c2d2b7dbb541c1e922538c49fa04c494ae3d7 upstream. When a blkcg configuration is targeted to a partition rather than a whole device, blkg_conf_prep fails with -EINVAL; unfortunately, it forgets to put the gendisk ref in that case. Fix it. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 15d6dd8f74b03fcdfbb66fa45f3c3dfdaccb3f75 Author: Bernhard Bender Date: Thu Jul 23 13:58:08 2015 -0700 Input: usbtouchscreen - avoid unresponsive TSC-30 touch screen commit 968491709e5b1aaf429428814fff3d932fa90b60 upstream. This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30 touch screen. Due to a missing delay between the RESET and SET_RATE commands, the touch screen may become unresponsive during system startup or driver loading. According to the DMC documentation, a delay is needed after the RESET command to allow the chip to complete its internal initialization. As this delay is not guaranteed, we had a system where the touch screen occasionally did not send any touch data. There was no other indication of the problem. The patch fixes the problem by adding a 150ms delay between the RESET and SET_RATE commands. Suggested-by: Jakob Mustafa Signed-off-by: Bernhard Bender Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 9fbf45ec96502ed1f3d6498c142e7e18f0cec9b2 Author: Chris Metcalf Date: Thu Jul 23 14:11:09 2015 -0400 tile: use free_bootmem_late() for initrd commit 3f81d2447b37ac697b3c600039f2c6b628c06e21 upstream. We were previously using free_bootmem() and just getting lucky that nothing too bad happened. Signed-off-by: Chris Metcalf Signed-off-by: Greg Kroah-Hartman commit d83122855852f39491e9d418df397ea292b5a5be Author: NeilBrown Date: Fri Jul 24 09:22:16 2015 +1000 md/raid1: fix test for 'was read error from last working device'. commit 34cab6f42003cb06f48f86a86652984dec338ae9 upstream. When we get a read error from the last working device, we don't try to repair it, and don't fail the device. We simple report a read error to the caller. However the current test for 'is this the last working device' is wrong. When there is only one fully working device, it assumes that a non-faulty device is that device. However a spare which is rebuilding would be non-faulty but so not the only working device. So change the test from "!Faulty" to "In_sync". If ->degraded says there is only one fully working device and this device is in_sync, this must be the one. This bug has existed since we allowed read_balance to read from a recovering spare in v3.0 Reported-and-tested-by: Alexander Lyakas Fixes: 76073054c95b ("md/raid1: clean up read_balance.") Signed-off-by: NeilBrown Signed-off-by: Greg Kroah-Hartman commit 4713a3a3be8e81eddf2b4ab552e913b0a1cfaddf Author: Jingju Hou Date: Thu Jul 23 17:56:23 2015 +0800 mmc: sdhci-pxav3: fix platform_data is not initialized commit 9cd76049f0d90ae241f5ad80e311489824527000 upstream. pdev->dev.platform_data is not initialized if match is true in function sdhci_pxav3_probe. Just local variable pdata is assigned the return value from function pxav3_get_mmc_pdata(). static int sdhci_pxav3_probe(struct platform_device *pdev) { struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; ... if (match) { ret = mmc_of_parse(host->mmc); if (ret) goto err_of_parse; sdhci_get_of_property(pdev); pdata = pxav3_get_mmc_pdata(dev); } ... } Signed-off-by: Jingju Hou Fixes: b650352dd3df("mmc: sdhci-pxa: Add device tree support") Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 04c6708522d382d8961214ceceed2052647f70c2 Author: Joakim Tjernlund Date: Wed Jul 22 16:44:26 2015 +0200 mmc: sdhci-esdhc: Make 8BIT bus work commit 8e91125ff3f57f15c6568e2a6d32743b3f7815e4 upstream. Support for 8BIT bus with was added some time ago to sdhci-esdhc but then missed to remove the 8BIT from the reserved bit mask which made 8BIT non functional. Fixes: 66b50a00992d ("mmc: esdhc: Add support for 8-bit bus width and..") Signed-off-by: Joakim Tjernlund Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit b07016348b0bec192414ade9fb0e385fdc8c4a52 Author: Tom Hughes Date: Mon Jun 29 19:41:49 2015 +0100 mac80211: clear subdir_stations when removing debugfs commit 4479004e6409087d1b4986881dc98c6c15dffb28 upstream. If we don't do this, and we then fail to recreate the debugfs directory during a mode change, then we will fail later trying to add stations to this now bogus directory: BUG: unable to handle kernel NULL pointer dereference at 0000006c IP: [] mutex_lock+0x12/0x30 Call Trace: [] start_creating+0x44/0xc0 [] debugfs_create_dir+0x13/0xf0 [] ieee80211_sta_debugfs_add+0x6e/0x490 [mac80211] Signed-off-by: Tom Hughes Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit bdedc624e9864fb39ddd2f0d99925a8746ef91db Author: Seymour, Shane M Date: Thu Jul 2 12:01:10 2015 +0000 st: null pointer dereference panic caused by use after kref_put by st_open commit e7ac6c6666bec0a354758a1298d3231e4a635362 upstream. Two SLES11 SP3 servers encountered similar crashes simultaneously following some kind of SAN/tape target issue: ... qla2xxx [0000:81:00.0]-801c:3: Abort command issued nexus=3:0:2 -- 1 2002. qla2xxx [0000:81:00.0]-801c:3: Abort command issued nexus=3:0:2 -- 1 2002. qla2xxx [0000:81:00.0]-8009:3: DEVICE RESET ISSUED nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800c:3: do_reset failed for cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800f:3: DEVICE RESET FAILED: Task management failed nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-8009:3: TARGET RESET ISSUED nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800c:3: do_reset failed for cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800f:3: TARGET RESET FAILED: Task management failed nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-8012:3: BUS RESET ISSUED nexus=3:0:2. qla2xxx [0000:81:00.0]-802b:3: BUS RESET SUCCEEDED nexus=3:0:2. qla2xxx [0000:81:00.0]-505f:3: Link is operational (8 Gbps). qla2xxx [0000:81:00.0]-8018:3: ADAPTER RESET ISSUED nexus=3:0:2. qla2xxx [0000:81:00.0]-00af:3: Performing ISP error recovery - ha=ffff88bf04d18000. rport-3:0-0: blocked FC remote port time out: removing target and saving binding qla2xxx [0000:81:00.0]-505f:3: Link is operational (8 Gbps). qla2xxx [0000:81:00.0]-8017:3: ADAPTER RESET SUCCEEDED nexus=3:0:2. rport-2:0-0: blocked FC remote port time out: removing target and saving binding sg_rq_end_io: device detached BUG: unable to handle kernel NULL pointer dereference at 00000000000002a8 IP: [] __pm_runtime_idle+0x28/0x90 PGD 7e6586f067 PUD 7e5af06067 PMD 0 [1739975.390354] Oops: 0002 [#1] SMP CPU 0 ... Supported: No, Proprietary modules are loaded [1739975.390463] Pid: 27965, comm: ABCD Tainted: PF X 3.0.101-0.29-default #1 HP ProLiant DL580 Gen8 RIP: 0010:[] [] __pm_runtime_idle+0x28/0x90 RSP: 0018:ffff8839dc1e7c68 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff883f0592fc00 RCX: 0000000000000090 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000138 RBP: 0000000000000138 R08: 0000000000000010 R09: ffffffff81bd39d0 R10: 00000000000009c0 R11: ffffffff81025790 R12: 0000000000000001 R13: ffff883022212b80 R14: 0000000000000004 R15: ffff883022212b80 FS: 00007f8e54560720(0000) GS:ffff88407f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000002a8 CR3: 0000007e6ced6000 CR4: 00000000001407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ABCD (pid: 27965, threadinfo ffff8839dc1e6000, task ffff883592e0c640) Stack: ffff883f0592fc00 00000000fffffffa 0000000000000001 ffff883022212b80 ffff883eff772400 ffffffffa03fa309 0000000000000000 0000000000000000 ffffffffa04003a0 ffff883f063196c0 ffff887f0379a930 ffffffff8115ea1e Call Trace: [] st_open+0x129/0x240 [st] [] chrdev_open+0x13e/0x200 [] __dentry_open+0x198/0x310 [] do_last+0x1f4/0x800 [] path_openat+0xd9/0x420 [] do_filp_open+0x4c/0xc0 [] do_sys_open+0x17f/0x250 [] system_call_fastpath+0x16/0x1b [<00007f8e4f617fd0>] 0x7f8e4f617fcf Code: eb d3 90 48 83 ec 28 40 f6 c6 04 48 89 6c 24 08 4c 89 74 24 20 48 89 fd 48 89 1c 24 4c 89 64 24 10 41 89 f6 4c 89 6c 24 18 74 11 ff 8f 70 01 00 00 0f 94 c0 45 31 ed 84 c0 74 2b 4c 8d a5 a0 RIP [] __pm_runtime_idle+0x28/0x90 RSP CR2: 00000000000002a8 Analysis reveals the cause of the crash to be due to STp->device being NULL. The pointer was NULLed via scsi_tape_put(STp) when it calls scsi_tape_release(). In st_open() we jump to err_out after scsi_block_when_processing_errors() completes and returns the device as offline (sdev_state was SDEV_DEL): 1180 /* Open the device. Needs to take the BKL only because of incrementing the SCSI host 1181 module count. */ 1182 static int st_open(struct inode *inode, struct file *filp) 1183 { 1184 int i, retval = (-EIO); 1185 int resumed = 0; 1186 struct scsi_tape *STp; 1187 struct st_partstat *STps; 1188 int dev = TAPE_NR(inode); 1189 char *name; ... 1217 if (scsi_autopm_get_device(STp->device) < 0) { 1218 retval = -EIO; 1219 goto err_out; 1220 } 1221 resumed = 1; 1222 if (!scsi_block_when_processing_errors(STp->device)) { 1223 retval = (-ENXIO); 1224 goto err_out; 1225 } ... 1264 err_out: 1265 normalize_buffer(STp->buffer); 1266 spin_lock(&st_use_lock); 1267 STp->in_use = 0; 1268 spin_unlock(&st_use_lock); 1269 scsi_tape_put(STp); <-- STp->device = 0 after this 1270 if (resumed) 1271 scsi_autopm_put_device(STp->device); 1272 return retval; The ref count for the struct scsi_tape had already been reduced to 1 when the .remove method of the st module had been called. The kref_put() in scsi_tape_put() caused scsi_tape_release() to be called: 0266 static void scsi_tape_put(struct scsi_tape *STp) 0267 { 0268 struct scsi_device *sdev = STp->device; 0269 0270 mutex_lock(&st_ref_mutex); 0271 kref_put(&STp->kref, scsi_tape_release); <-- calls this 0272 scsi_device_put(sdev); 0273 mutex_unlock(&st_ref_mutex); 0274 } In scsi_tape_release() the struct scsi_device in the struct scsi_tape gets set to NULL: 4273 static void scsi_tape_release(struct kref *kref) 4274 { 4275 struct scsi_tape *tpnt = to_scsi_tape(kref); 4276 struct gendisk *disk = tpnt->disk; 4277 4278 tpnt->device = NULL; <<<---- where the dev is nulled 4279 4280 if (tpnt->buffer) { 4281 normalize_buffer(tpnt->buffer); 4282 kfree(tpnt->buffer->reserved_pages); 4283 kfree(tpnt->buffer); 4284 } 4285 4286 disk->private_data = NULL; 4287 put_disk(disk); 4288 kfree(tpnt); 4289 return; 4290 } Although the problem was reported on SLES11.3 the problem appears in linux-next as well. The crash is fixed by reordering the code so we no longer access the struct scsi_tape after the kref_put() is done on it in st_open(). Signed-off-by: Shane Seymour Signed-off-by: Darren Lavender Reviewed-by: Johannes Thumshirn Acked-by: Kai Mäkisara Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman commit c97464e307a0810f9a1f464c6a2f6287073cce59 Author: Takashi Iwai Date: Thu Jul 30 22:30:29 2015 +0200 ALSA: hda - Fix MacBook Pro 5,2 quirk commit 649ccd08534ee26deb2e5b08509800d0e95167f5 upstream. MacBook Pro 5,2 with ALC889 codec had already a fixup entry, but this seems not working correctly, a fix for pin NID 0x15 is needed in addition. It's equivalent with the fixup for MacBook Air 1,1, so use this instead. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102131 Reported-and-tested-by: Jeffery Miller Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 025b8126c559fcd2f19e969a896e6045aa778e54 Author: Yao-Wen Mao Date: Wed Jul 29 15:13:54 2015 +0800 ALSA: usb-audio: add dB range mapping for some devices commit 2d1cb7f658fb9c3ba8f9dab8aca297d4dfdec835 upstream. Add the correct dB ranges of Bose Companion 5 and Drangonfly DAC 1.2. Signed-off-by: Yao-Wen Mao Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit a9049040dc3cea7f1a23cb57e454ebde4310089f Author: Dominic Sacré Date: Tue Jun 30 17:41:33 2015 +0200 ALSA: usb-audio: Add MIDI support for Steinberg MI2/MI4 commit 0689a86ae814f39af94a9736a0a5426dd82eb107 upstream. The Steinberg MI2 and MI4 interfaces are compatible with the USB class audio spec, but the MIDI part of the devices is reported as a vendor specific interface. This patch adds entries to quirks-table.h to recognize the MIDI endpoints. Audio functionality was already working and is unaffected by this change. Signed-off-by: Dominic Sacré Signed-off-by: Albert Huitsing Acked-by: Clemens Ladisch Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit dcc2305a489922a4fff7072bc811492f0fa5b2ed Author: Thomas Gleixner Date: Thu Jul 16 14:10:17 2015 +0200 genirq: Prevent resend to interrupts marked IRQ_NESTED_THREAD commit 75a06189fc508a2acf470b0b12710362ffb2c4b1 upstream. The resend mechanism happily calls the interrupt handler of interrupts which are marked IRQ_NESTED_THREAD from softirq context. This can result in crashes because the interrupt handler is not the proper way to invoke the device handlers. They must be invoked via handle_nested_irq. Prevent the resend even if the interrupt has no valid parent irq set. Its better to have a lost interrupt than a crashing machine. Reported-by: Uwe Kleine-König Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman commit 508a750fe6cc950bad1cca07f1637ce4815b5420 Author: Alexey Brodkin Date: Mon Jul 13 10:25:17 2015 +0300 ARC: make sure instruction_pointer() returns unsigned value commit f51e2f1911122879eefefa4c592dea8bf794b39c upstream. Currently instruction_pointer() returns pt_regs->ret and so return value is of type "long", which implicitly stands for "signed long". While that's perfectly fine when dealing with 32-bit values if return value of instruction_pointer() gets assigned to 64-bit variable sign extension may happen. And at least in one real use-case it happens already. In perf_prepare_sample() return value of perf_instruction_pointer() (which is an alias to instruction_pointer() in case of ARC) is assigned to (struct perf_sample_data)->ip (which type is "u64"). And what we see if instuction pointer points to user-space application that in case of ARC lays below 0x8000_0000 "ip" gets set properly with leading 32 zeros. But if instruction pointer points to kernel address space that starts from 0x8000_0000 then "ip" is set with 32 leadig "f"-s. I.e. id instruction_pointer() returns 0x8100_0000, "ip" will be assigned with 0xffff_ffff__8100_0000. Which is obviously wrong. In particular that issuse broke output of perf, because perf was unable to associate addresses like 0xffff_ffff__8100_0000 with anything from /proc/kallsyms. That's what we used to see: ----------->8---------- 6.27% ls [unknown] [k] 0xffffffff8046c5cc 2.96% ls libuClibc-0.9.34-git.so [.] memcpy 2.25% ls libuClibc-0.9.34-git.so [.] memset 1.66% ls [unknown] [k] 0xffffffff80666536 1.54% ls libuClibc-0.9.34-git.so [.] 0x000224d6 1.18% ls libuClibc-0.9.34-git.so [.] 0x00022472 ----------->8---------- With that change perf output looks much better now: ----------->8---------- 8.21% ls [kernel.kallsyms] [k] memset 3.52% ls libuClibc-0.9.34-git.so [.] memcpy 2.11% ls libuClibc-0.9.34-git.so [.] malloc 1.88% ls libuClibc-0.9.34-git.so [.] memset 1.64% ls [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.41% ls [kernel.kallsyms] [k] __d_lookup_rcu ----------->8---------- Signed-off-by: Alexey Brodkin Cc: arc-linux-dev@synopsys.com Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta Signed-off-by: Greg Kroah-Hartman commit 3a893ef1923c6f93ca477ff583efe893ff98a109 Author: Martin Schwidefsky Date: Mon Jul 6 17:58:19 2015 +0200 s390/sclp: clear upper register halves in _sclp_print_early commit f9c87a6f46d508eae0d9ae640be98d50f237f827 upstream. If the kernel is compiled with gcc 5.1 and the XZ compression option the decompress_kernel function calls _sclp_print_early in 64-bit mode while the content of the upper register half of %r6 is non-zero. This causes a specification exception on the servc instruction in _sclp_servc. The _sclp_print_early function saves and restores the upper registers halves but it fails to clear them for the 31-bit code of the mini sclp driver. Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman commit 518309e081d6328daf443531c3a70cbb10277006 Author: Al Viro Date: Wed Jul 8 02:42:38 2015 +0100 freeing unlinked file indefinitely delayed commit 75a6f82a0d10ef8f13cd8fe7212911a0252ab99e upstream. Normally opening a file, unlinking it and then closing will have the inode freed upon close() (provided that it's not otherwise busy and has no remaining links, of course). However, there's one case where that does *not* happen. Namely, if you open it by fhandle with cold dcache, then unlink() and close(). In normal case you get d_delete() in unlink(2) notice that dentry is busy and unhash it; on the final dput() it will be forcibly evicted from dcache, triggering iput() and inode removal. In this case, though, we end up with *two* dentries - disconnected (created by open-by-fhandle) and regular one (used by unlink()). The latter will have its reference to inode dropped just fine, but the former will not - it's considered hashed (it is on the ->s_anon list), so it will stay around until the memory pressure will finally do it in. As the result, we have the final iput() delayed indefinitely. It's trivial to reproduce - void flush_dcache(void) { system("mount -o remount,rw /"); } static char buf[20 * 1024 * 1024]; main() { int fd; union { struct file_handle f; char buf[MAX_HANDLE_SZ]; } x; int m; x.f.handle_bytes = sizeof(x); chdir("/root"); mkdir("foo", 0700); fd = open("foo/bar", O_CREAT | O_RDWR, 0600); close(fd); name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0); flush_dcache(); fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR); unlink("foo/bar"); write(fd, buf, sizeof(buf)); system("df ."); /* 20Mb eaten */ close(fd); system("df ."); /* should've freed those 20Mb */ flush_dcache(); system("df ."); /* should be the same as #2 */ } will spit out something like Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 283282 21692 93% / - inode gets freed only when dentry is finally evicted (here we trigger than by remount; normally it would've happened in response to memory pressure hell knows when). Acked-by: J. Bruce Fields Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman commit efcbc94afe6dd0f8a4b112a0f3385cdc89ea58ba Author: Kirill A. Shutemov Date: Mon Jul 6 23:18:37 2015 +0300 mm: avoid setting up anonymous pages into file mapping commit 6b7339f4c31ad69c8e9c0b2859276e22cf72176d upstream. Reading page fault handler code I've noticed that under right circumstances kernel would map anonymous pages into file mappings: if the VMA doesn't have vm_ops->fault() and the VMA wasn't fully populated on ->mmap(), kernel would handle page fault to not populated pte with do_anonymous_page(). Let's change page fault handler to use do_anonymous_page() only on anonymous VMA (->vm_ops == NULL) and make sure that the VMA is not shared. For file mappings without vm_ops->fault() or shred VMA without vm_ops, page fault on pte_none() entry would lead to SIGBUS. Signed-off-by: Kirill A. Shutemov Acked-by: Oleg Nesterov Cc: Andrew Morton Cc: Willy Tarreau Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman