commit 8a5f782c33c04ea5c9b3ca6fb32d6039e2e5c0c9 Author: Greg Kroah-Hartman Date: Wed Mar 18 13:31:43 2015 +0100 Linux 3.14.36 commit f11bd978ab893f5f1229ea275dd05e8234619db0 Author: Sergei Shtylyov Date: Wed Dec 24 17:43:27 2014 +0300 clk-gate: fix bit # check in clk_register_gate() commit 2e9dcdae4068460c45a308dd891be5248260251c upstream. In case CLK_GATE_HIWORD_MASK flag is passed to clk_register_gate(), the bit # should be no higher than 15, however the corresponding check is obviously off- by-one. Fixes: 045779942c04 ("clk: gate: add CLK_GATE_HIWORD_MASK") Signed-off-by: Sergei Shtylyov Signed-off-by: Michael Turquette Signed-off-by: Greg Kroah-Hartman commit f23e11ca321f7f54be33cbf90932ac9f62db8c9f Author: Kalle Valo Date: Tue Mar 11 12:58:00 2014 +0200 ath6kl: fix struct hif_scatter_req list handling commit 31b9cc9a873dcab161999622314f98a75d838975 upstream. Jason noticed that with Yocto GCC 4.8.1 ath6kl crashes with this iperf command: iperf -c $TARGET_IP -i 5 -t 50 -w 1M The crash was: Unable to handle kernel paging request at virtual address 1a480000 pgd = 80004000 [1a480000] *pgd=00000000 Internal error: Oops: 805 [#1] SMP ARM Modules linked in: ath6kl_sdio ath6kl_core [last unloaded: ath6kl_core] CPU: 0 PID: 1953 Comm: kworker/u4:0 Not tainted 3.10.9-1.0.0_alpha+dbf364b #1 Workqueue: ath6kl ath6kl_sdio_write_async_work [ath6kl_sdio] task: dcc9a680 ti: dc9ae000 task.ti: dc9ae000 PC is at v7_dma_clean_range+0x20/0x38 LR is at dma_cache_maint_page+0x50/0x54 pc : [<8001a6f8>] lr : [<800170fc>] psr: 20000093 sp : dc9afcf8 ip : 8001a748 fp : 00000004 r10: 00000000 r9 : 00000001 r8 : 00000000 r7 : 00000001 r6 : 00000000 r5 : 80cb7000 r4 : 03f9a480 r3 : 0000001f r2 : 00000020 r1 : 1a480000 r0 : 1a480000 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 6cc5004a DAC: 00000015 Process kworker/u4:0 (pid: 1953, stack limit = 0xdc9ae238) Stack: (0xdc9afcf8 to 0xdc9b0000) fce0: 80c9b29c 00000000 fd00: 00000000 80017134 8001a748 dc302ac0 00000000 00000000 dc454a00 80c12ed8 fd20: dc115410 80017238 00000000 dc454a10 00000001 80017588 00000001 00000000 fd40: 00000000 dc302ac0 dc9afe38 dc9afe68 00000004 80c12ed8 00000000 dc454a00 fd60: 00000004 80436f88 00000000 00000000 00000600 0000ffff 0000000c 80c113c4 fd80: 80c9b29c 00000001 00000004 dc115470 60000013 dc302ac0 dc46e000 dc302800 fda0: dc9afe10 dc302b78 60000013 dc302ac0 dc46e000 00000035 dc46e5b0 80438c90 fdc0: dc9afe10 dc302800 dc302800 dc9afe68 dc9afe38 80424cb4 00000005 dc9afe10 fde0: dc9afe20 80424de8 dc9afe10 dc302800 dc46e910 80424e90 dc473c00 dc454f00 fe00: 000001b5 7f619d64 dcc7c830 00000000 00000000 dc9afe38 dc9afe68 00000000 fe20: 00000000 00000000 dc9afe28 dc9afe28 80424d80 00000000 00000035 9cac0034 fe40: 00000000 00000000 00000000 00000000 000001b5 00000000 00000000 00000000 fe60: dc9afe68 dc9afe10 3b9aca00 00000000 00000080 00000034 00000000 00000100 fe80: 00000000 00000000 dc9afe10 00000004 dc454a00 00000000 dc46e010 dc46e96c fea0: dc46e000 dc46e964 00200200 00100100 dc46e910 7f619ec0 00000600 80c0e770 fec0: dc15a900 dcc7c838 00000000 dc46e954 8042d434 dcc44680 dc46e954 dc004400 fee0: dc454500 00000000 00000000 dc9ae038 dc004400 8003c450 dcc44680 dc004414 ff00: dc46e954 dc454500 00000001 dcc44680 dc004414 dcc44698 dc9ae000 dc9ae030 ff20: 00000001 dc9ae000 dc004400 8003d158 8003d020 00000000 00000000 80c53941 ff40: dc9aff64 dcb71ea0 00000000 dcc44680 8003d020 00000000 00000000 00000000 ff60: 00000000 80042480 00000000 00000000 000000f8 dcc44680 00000000 00000000 ff80: dc9aff80 dc9aff80 00000000 00000000 dc9aff90 dc9aff90 dc9affac dcb71ea0 ffa0: 800423cc 00000000 00000000 8000e018 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<8001a6f8>] (v7_dma_clean_range+0x20/0x38) from [<800170fc>] (dma_cache_maint_page+0x50/0x54) [<800170fc>] (dma_cache_maint_page+0x50/0x54) from [<80017134>] (__dma_page_cpu_to_dev+0x34/0x9c) [<80017134>] (__dma_page_cpu_to_dev+0x34/0x9c) from [<80017238>] (arm_dma_map_page+0x64/0x68) [<80017238>] (arm_dma_map_page+0x64/0x68) from [<80017588>] (arm_dma_map_sg+0x7c/0xf4) [<80017588>] (arm_dma_map_sg+0x7c/0xf4) from [<80436f88>] (sdhci_send_command+0x894/0xe00) [<80436f88>] (sdhci_send_command+0x894/0xe00) from [<80438c90>] (sdhci_request+0xc0/0x1ec) [<80438c90>] (sdhci_request+0xc0/0x1ec) from [<80424cb4>] (mmc_start_request+0xb8/0xd4) [<80424cb4>] (mmc_start_request+0xb8/0xd4) from [<80424de8>] (__mmc_start_req+0x60/0x84) [<80424de8>] (__mmc_start_req+0x60/0x84) from [<80424e90>] (mmc_wait_for_req+0x10/0x20) [<80424e90>] (mmc_wait_for_req+0x10/0x20) from [<7f619d64>] (ath6kl_sdio_scat_rw.isra.10+0x1dc/0x240 [ath6kl_sdio]) [<7f619d64>] (ath6kl_sdio_scat_rw.isra.10+0x1dc/0x240 [ath6kl_sdio]) from [<7f619ec0>] (ath6kl_sdio_write_async_work+0x5c/0x104 [ath6kl_sdio]) [<7f619ec0>] (ath6kl_sdio_write_async_work+0x5c/0x104 [ath6kl_sdio]) from [<8003c450>] (process_one_work+0x10c/0x370) [<8003c450>] (process_one_work+0x10c/0x370) from [<8003d158>] (worker_thread+0x138/0x3fc) [<8003d158>] (worker_thread+0x138/0x3fc) from [<80042480>] (kthread+0xb4/0xb8) [<80042480>] (kthread+0xb4/0xb8) from [<8000e018>] (ret_from_fork+0x14/0x3c) Code: e1a02312 e2423001 e1c00003 f57ff04f (ee070f3a) ---[ end trace 0c038f0b8e0b67a3 ]--- Kernel panic - not syncing: Fatal exception Jason's analysis: "The GCC 4.8.1 compiler will not do the for-loop till scat_entries, instead, it only run one round loop. This may be caused by that the GCC 4.8.1 thought that the scat_list only have one item and then no need to do full iteration, but this is simply wrong by looking at the assebly code. This will cause the sg buffer not get set when scat_entries > 1 and thus lead to kernel panic. Note: This issue not observed with GCC 4.7.2, only found on the GCC 4.8.1)" Fix this by using the normal [0] style for defining unknown number of list entries following the struct. This also fixes corruption with scat_q_depth, which was mistankely added to the end of struct and overwritten if there were more than item in the scat list. Reported-by: Jason Liu Tested-by: Jason Liu Signed-off-by: Kalle Valo Cc: Josh Cartwright Signed-off-by: Greg Kroah-Hartman commit cd15a8634eb6f6123846cd032f7c43040c7b8a1a Author: Sergey Ryazanov Date: Wed Feb 4 00:21:13 2015 +0300 ath5k: fix spontaneus AR5312 freezes commit 8bfae4f9938b6c1f033a5159febe97e441d6d526 upstream. Sometimes while CPU have some load and ath5k doing the wireless interface reset the whole WiSoC completely freezes. Set of tests shows that using atomic delay function while we wait interface reset helps to avoid such freezes. The easiest way to reproduce this issue: create a station interface, start continous scan with wpa_supplicant and load CPU by something. Or just create multiple station interfaces and put them all in continous scan. This patch partially reverts the commit 1846ac3dbec0 ("ath5k: Use usleep_range where possible"), which replaces initial udelay() by usleep_range(). I do not know actual source of this issue, but all looks like that HW freeze is caused by transaction on internal SoC bus, while wireless block is in reset state. Also I should note that I do not know how many chips are affected, but I did not see this issue with chips, other than AR5312. CC: Jiri Slaby CC: Nick Kossifidis CC: Luis R. Rodriguez Fixes: 1846ac3dbec0 ("ath5k: Use usleep_range where possible") Reported-by: Christophe Prevotaux Tested-by: Christophe Prevotaux Tested-by: Eric Bree Signed-off-by: Sergey Ryazanov Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman commit e47d8943daa5c3df16fc8f7effca2940f6fd9320 Author: Peter Ujfalusi Date: Tue Mar 3 13:38:14 2015 +0200 ASoC: omap-pcm: Correct dma mask commit d51199a83a2cf82a291d19ee852c44caa511427d upstream. DMA_BIT_MASK of 64 is not valid dma address mask for OMAPs, it should be set to 32. The 64 was introduced by commit (in 2009): a152ff24b978 ASoC: OMAP: Make DMA 64 aligned But the dma_mask and coherent_dma_mask can not be used to specify alignment. Fixes: a152ff24b978 (ASoC: OMAP: Make DMA 64 aligned) Reported-by: Grygorii Strashko Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit e1887ec351044fde2e53b3210fcf5f9f22780281 Author: Trond Myklebust Date: Thu Feb 26 12:54:46 2015 -0500 NFSv4: Don't call put_rpccred() under the rcu_read_lock() commit 7c0af9ffb7bb4e5355470fa60b3eb711ddf226fa upstream. put_rpccred() can sleep. Fixes: 8f649c3762547 ("NFSv4: Fix the locking in nfs_inode_reclaim_delegation()") Signed-off-by: Trond Myklebust Signed-off-by: Greg Kroah-Hartman commit d0cf2aa4ba438fd0a4072edc59620b1b1f3cb3e7 Author: Chris Wilson Date: Sun Mar 1 10:41:37 2015 +0000 ACPI / video: Load the module even if ACPI is disabled commit 6e17cb12881ba8d5e456b89f072dc6b70048af36 upstream. i915.ko depends upon the acpi/video.ko module and so refuses to load if ACPI is disabled at runtime if for example the BIOS is broken beyond repair. acpi/video provides an optional service for i915.ko and so we should just allow the modules to load, but do no nothing in order to let the machines boot correctly. Reported-by: Bill Augur Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: Jani Nikula Acked-by: Aaron Lu [ rjw: Fixed up the new comment in acpi_video_init() ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit f563d4825241ad7c9fd8fd3538efece0607d5869 Author: Dan Carpenter Date: Thu Jan 15 12:21:21 2015 +0300 efi: Small leak on error in runtime map code commit 86d68a58d00db3770735b5919ef2c6b12d7f06f3 upstream. The "> 0" here should ">= 0" so we free map_entries[0]. Fixes: 926172d46038 ('efi: Export EFI runtime memory mapping to sysfs') Signed-off-by: Dan Carpenter Acked-by: Dave Young Signed-off-by: Matt Fleming Signed-off-by: Greg Kroah-Hartman commit 6831c3a878de7b749b82f8894e199ea8a9456a50 Author: Alex Deucher Date: Thu Feb 19 16:02:15 2015 -0500 drm/radeon: fix 1 RB harvest config setup for TN/RL commit dbfb00c3e7e18439f2ebf67fe99bf7a50b5bae1e upstream. The logic was reversed from what the hw actually exposed. Fixes graphics corruption in certain harvest configurations. Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit cdd9eb05a4d3e3143cf8e62020883665db525531 Author: Alex Deucher Date: Wed Feb 18 01:05:30 2015 -0500 drm/radeon: use drm_mode_vrefresh() rather than mode->vrefresh commit 3d2d98ee1af0cf6eebfbd6bff4c17d3601ac1284 upstream. Just in case it hasn't been calculated for the mode. Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit cf0690d1b106d0b9ad99688d7f9cc96d6e7f9977 Author: Jason Gerecke Date: Thu Jan 22 15:53:28 2015 -0800 HID: wacom: Report ABS_MISC event for Cintiq Companion Hybrid commit 33e5df0e0e32027866e9fb00451952998fc957f2 upstream. It appears that the Cintiq Companion Hybrid does not send an ABS_MISC event to userspace when any of its ExpressKeys are pressed. This is not strictly necessary now that the pad exists on its own device, but should be fixed for consistency's sake. Traditionally both the stylus and pad shared the same device node, and xf86-input-wacom would use ABS_MISC for disambiguation. Not sending this causes the Hybrid to behave incorrectly with xf86-input-wacom beginning with its 8f44f3 commit. Signed-off-by: Jason Gerecke Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina [killertofu@gmail.com: ported to drivers/input/tablet/wacom_wac.c] Signed-off-by: Jason Gerecke Signed-off-by: Greg Kroah-Hartman commit f3995eb51ca8cab80105fb01f128f10839298145 Author: Jiri Kosina Date: Tue Jan 6 22:34:19 2015 +0100 HID: fixup the conflicting keyboard mappings quirk commit 8e7b341037db1835ee6eea64663013cbfcf33575 upstream. The ignore check that got added in 6ce901eb61 ("HID: input: fix confusion on conflicting mappings") needs to properly check for VARIABLE reports as well (ARRAY reports should be ignored), otherwise legitimate keyboards might break. Fixes: 6ce901eb61 ("HID: input: fix confusion on conflicting mappings") Reported-by: Fredrik Hallenberg Reported-by: David Herrmann Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 20f6cd730adc80de1368290df4db9195a96e5ad6 Author: David Herrmann Date: Mon Dec 29 15:21:26 2014 +0100 HID: input: fix confusion on conflicting mappings commit 6ce901eb61aa30ba8565c62049ee80c90728ef14 upstream. On an PC-101/103/104 keyboard (American layout) the 'Enter' key and its neighbours look like this: +---+ +---+ +-------+ | 1 | | 2 | | 5 | +---+ +---+ +-------+ +---+ +-----------+ | 3 | | 4 | +---+ +-----------+ On a PC-102/105 keyboard (European layout) it looks like this: +---+ +---+ +-------+ | 1 | | 2 | | | +---+ +---+ +-+ 4 | +---+ +---+ | | | 3 | | 5 | | | +---+ +---+ +-----+ (Note that the number of keys is the same, but key '5' is moved down and the shape of key '4' is changed. Keys '1' to '3' are exactly the same.) The keys 1-4 report the same scan-code in HID in both layouts, even though the keysym they produce is usually different depending on the XKB-keymap used by user-space. However, key '5' (US 'backslash'/'pipe') reports 0x31 for the upper layout and 0x32 for the lower layout, as defined by the HID spec. This is highly confusing as the linux-input API uses a single keycode for both. So far, this was never a problem as there never has been a keyboard with both of those keys present at the same time. It would have to look something like this: +---+ +---+ +-------+ | 1 | | 2 | | x31 | +---+ +---+ +-------+ +---+ +---+ +-----+ | 3 | |x32| | 4 | +---+ +---+ +-----+ HID can represent such a keyboard, but the linux-input API cannot. Furthermore, any user-space mapping would be confused by this and, luckily, no-one ever produced such hardware. Now, the HID input layer fixed this mess by mapping both 0x31 and 0x32 to the same keycode (KEY_BACKSLASH==0x2b). As only one of both physical keys is present on a hardware, this works just fine. Lets introduce hardware-vendors into this: ------------------------------------------ Unfortunately, it seems way to expensive to produce a different device for American and European layouts. Therefore, hardware-vendors put both keys, (0x31 and 0x32) on the same keyboard, but only one of them is hooked up to the physical button, the other one is 'dead'. This means, they can use the same hardware, with a different button-layout and automatically produce the correct HID events for American *and* European layouts. This is unproblematic for normal keyboards, as the 'dead' key will never report any KEY-DOWN events. But RollOver keyboards send the whole matrix on each key-event, allowing n-key roll-over mode. This means, we get a 0x31 and 0x32 event on each key-press. One of them will always be 0, the other reports the real state. As we map both to the same keycode, we will get spurious key-events, even though the real key-state never changed. The easiest way would be to blacklist 'dead' keys and never handle those. We could simply read the 'country' tag of USB devices and blacklist either key according to the layout. But... hardware vendors... want the same device for all countries and thus many of them set 'country' to 0 for all devices. Meh.. So we have to deal with this properly. As we cannot know which of the keys is 'dead', we either need a heuristic and track those keys, or we simply make use of our value-tracking for HID fields. We simply ignore HID events for absolute data if the data didn't change. As HID tracks events on the HID level, we haven't done the keycode translation, yet. Therefore, the 'dead' key is tracked independently of the real key, therefore, any events on it will be ignored. This patch simply discards any HID events for absolute data if it didn't change compared to the last report. We need to ignore relative and buffered-byte reports for obvious reasons. But those cannot be affected by this bug, so we're fine. Preferably, we'd do this filtering on the HID-core level. But this might break a lot of custom drivers, if they do not follow the HID specs. Therefore, we do this late in hid-input just before we inject it into the input layer (which does the exact same filtering, but on the keycode level). If this turns out to break some devices, we might have to limit filtering to EV_KEY events. But lets try to do the Right Thing first, and properly filter any absolute data that didn't change. This patch is tagged for 'stable' as it fixes a lot of n-key RollOver hardware. We might wanna wait with backporting for a while, before we know it doesn't break anything else, though. Reported-by: Adam Goode Reported-by: Fredrik Hallenberg Tested-by: Fredrik Hallenberg Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 4d92b31f036497b3b52d789957c9d76d79e8e754 Author: Ian Abbott Date: Mon Jan 19 14:47:27 2015 +0000 staging: comedi: cb_pcidas64: fix incorrect AI range code handling commit be8e89087ec2d2c8a1ad1e3db64bf4efdfc3c298 upstream. The hardware range code values and list of valid ranges for the AI subdevice is incorrect for several supported boards. The hardware range code values for all boards except PCI-DAS4020/12 is determined by calling `ai_range_bits_6xxx()` based on the maximum voltage of the range and whether it is bipolar or unipolar, however it only returns the correct hardware range code for the PCI-DAS60xx boards. For PCI-DAS6402/16 (and /12) it returns the wrong code for the unipolar ranges. For PCI-DAS64/Mx/16 it returns the wrong code for all the ranges and the comedi range table is incorrect. Change `ai_range_bits_6xxx()` to use a look-up table pointed to by new member `ai_range_codes` of `struct pcidas64_board` to map the comedi range table indices to the hardware range codes. Use a new comedi range table for the PCI-DAS64/Mx/16 boards (and the commented out variants). Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman commit fe14b343fef97266686e7de566ba5bae0199a8b7 Author: Mikulas Patocka Date: Tue Feb 17 14:34:00 2015 -0500 dm snapshot: fix a possible invalid memory access on unload commit 22aa66a3ee5b61e0f4a0bfeabcaa567861109ec3 upstream. When the snapshot target is unloaded, snapshot_dtr() waits until pending_exceptions_count drops to zero. Then, it destroys the snapshot. Therefore, the function that decrements pending_exceptions_count should not touch the snapshot structure after the decrement. pending_complete() calls free_pending_exception(), which decrements pending_exceptions_count, and then it performs up_write(&s->lock) and it calls retry_origin_bios() which dereferences s->origin. These two memory accesses to the fields of the snapshot may touch the dm_snapshot struture after it is freed. This patch moves the call to free_pending_exception() to the end of pending_complete(), so that the snapshot will not be destroyed while pending_complete() is in progress. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit 66c4b5173c0626f7a5a9b79cb4422926bdb439b4 Author: Mikulas Patocka Date: Tue Feb 17 14:30:53 2015 -0500 dm: fix a race condition in dm_get_md commit 2bec1f4a8832e74ebbe859f176d8a9cb20dd97f4 upstream. The function dm_get_md finds a device mapper device with a given dev_t, increases the reference count and returns the pointer. dm_get_md calls dm_find_md, dm_find_md takes _minor_lock, finds the device, tests that the device doesn't have DMF_DELETING or DMF_FREEING flag, drops _minor_lock and returns pointer to the device. dm_get_md then calls dm_get. dm_get calls BUG if the device has the DMF_FREEING flag, otherwise it increments the reference count. There is a possible race condition - after dm_find_md exits and before dm_get is called, there are no locks held, so the device may disappear or DMF_FREEING flag may be set, which results in BUG. To fix this bug, we need to call dm_get while we hold _minor_lock. This patch renames dm_find_md to dm_get_md and changes it so that it calls dm_get while holding the lock. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit e2fed6e581440d57e481fedd7d080bed7f25e729 Author: Darrick J. Wong Date: Fri Feb 13 11:05:37 2015 -0800 dm io: reject unsupported DISCARD requests with EOPNOTSUPP commit 37527b869207ad4c208b1e13967d69b8bba1fbf9 upstream. I created a dm-raid1 device backed by a device that supports DISCARD and another device that does NOT support DISCARD with the following dm configuration: # echo '0 2048 mirror core 1 512 2 /dev/sda 0 /dev/sdb 0' | dmsetup create moo # lsblk -D NAME DISC-ALN DISC-GRAN DISC-MAX DISC-ZERO sda 0 4K 1G 0 `-moo (dm-0) 0 4K 1G 0 sdb 0 0B 0B 0 `-moo (dm-0) 0 4K 1G 0 Notice that the mirror device /dev/mapper/moo advertises DISCARD support even though one of the mirror halves doesn't. If I issue a DISCARD request (via fstrim, mount -o discard, or ioctl BLKDISCARD) through the mirror, kmirrord gets stuck in an infinite loop in do_region() when it tries to issue a DISCARD request to sdb. The problem is that when we call do_region() against sdb, num_sectors is set to zero because q->limits.max_discard_sectors is zero. Therefore, "remaining" never decreases and the loop never terminates. To fix this: before entering the loop, check for the combination of REQ_DISCARD and no discard and return -EOPNOTSUPP to avoid hanging up the mirror device. This bug was found by the unfortunate coincidence of pvmove and a discard operation in the RHEL 6.5 kernel; upstream is also affected. Signed-off-by: Darrick J. Wong Acked-by: "Martin K. Petersen" Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit 65a9353961fa8cc8644a089280f2f468df569415 Author: Mikulas Patocka Date: Thu Feb 12 10:09:20 2015 -0500 dm mirror: do not degrade the mirror on discard error commit f2ed51ac64611d717d1917820a01930174c2f236 upstream. It may be possible that a device claims discard support but it rejects discards with -EOPNOTSUPP. It happens when using loopback on ext2/ext3 filesystem driven by the ext4 driver. It may also happen if the underlying devices are moved from one disk on another. If discard error happens, we reject the bio with -EOPNOTSUPP, but we do not degrade the array. This patch fixes failed test shell/lvconvert-repair-transient.sh in the lvm2 testsuite if the testsuite is extracted on an ext2 or ext3 filesystem and it is being driven by the ext4 driver. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit 31e5cd3bb2a9141f5a927ed93f65ed97a20cf0ea Author: Ian Abbott Date: Tue Jan 27 18:16:51 2015 +0000 staging: comedi: comedi_compat32.c: fix COMEDI_CMD copy back commit 42b8ce6f55facfa101462e694d33fc6bca471138 upstream. `do_cmd_ioctl()` in "comedi_fops.c" handles the `COMEDI_CMD` ioctl. This returns `-EAGAIN` if it has copied a modified `struct comedi_cmd` back to user-space. (This occurs when the low-level Comedi driver's `do_cmdtest()` handler returns non-zero to indicate a problem with the contents of the `struct comedi_cmd`, or when the `struct comedi_cmd` has the `CMDF_BOGUS` flag set.) `compat_cmd()` in "comedi_compat32.c" handles the 32-bit compatible version of the `COMEDI_CMD` ioctl. Currently, it never copies a 32-bit compatible version of `struct comedi_cmd` back to user-space, which is at odds with the way the regular `COMEDI_CMD` ioctl is handled. To fix it, change `compat_cmd()` to copy a 32-bit compatible version of the `struct comedi_cmd` back to user-space when the main ioctl handler returns `-EAGAIN`. Signed-off-by: Ian Abbott Reviewed-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 5fcb774872c1cb0b7719a531daf817ff1ee6728e Author: Chen-Yu Tsai Date: Thu Jun 26 23:55:41 2014 +0800 clk: sunxi: Support factor clocks with N factor starting not from 0 commit 9a5e6c7eb5ccbb5f0d3a1dffce135f0a727f40e1 upstream. The PLLs on newer Allwinner SoC's, such as the A31 and A23, have a N multiplier factor that starts from 1, not 0. This patch adds an option to the factor clk driver's config data structures to specify the base value of N. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Maxime Ripard Signed-off-by: Greg Kroah-Hartman commit c52b5661bd41f738d3cd29a64d022efeb8eaaab3 Author: Hans de Goede Date: Sat Jan 24 12:56:32 2015 +0100 sunxi: clk: Set sun6i-pll1 n_start = 1 commit 76820fcf7aa5a418b69cb7bed31b62d1feb1d6ad upstream. For all pll-s on sun6i n == 0 means use a multiplier of 1, rather then 0 as it means on sun4i / sun5i / sun7i. n_start = 1 is already correctly set for sun6i pll6, but was missing for pll1, this commit fixes this. Cc: Chen-Yu Tsai Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard Signed-off-by: Greg Kroah-Hartman commit dc2301c7edf384c30def8af4689f9125617c9867 Author: Soren Brinkmann Date: Tue Jan 27 11:05:27 2015 -0800 clk: zynq: Force CPU_2X clock to be ungated commit 3dccfecdb867fe35b305a4e493ef5652b7d9d4cb upstream. The CPU_2X clock does not have a classical in-kernel user, but is, amongst other things, required for OCM and debug access. Make sure this clock is not mistakenly disabled during boot up by enabling it in the platform's clock driver. Fixes: 0ee52b157b8e 'clk: zynq: Add clock controller driver' Signed-off-by: Soren Brinkmann Signed-off-by: Michael Turquette Signed-off-by: Greg Kroah-Hartman commit 0457b9853d65c6b552e8bec1ee6ac28f63aa5247 Author: Minh Duc Tran Date: Mon Feb 9 18:54:09 2015 +0000 fixed invalid assignment of 64bit mask to host dma_boundary for scatter gather segment boundary limit. commit f76a610a8b4b6280eaedf48f3af9d5d74e418b66 upstream. In reference to bug https://bugzilla.redhat.com/show_bug.cgi?id=1097141 Assert is seen with AMD cpu whenever calling pci_alloc_consistent. [ 29.406183] ------------[ cut here ]------------ [ 29.410505] kernel BUG at lib/iommu-helper.c:13! Signed-off-by: Minh Tran Fixes: 6733b39a1301b0b020bbcbf3295852e93e624cb1 Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman commit ce084ba5d548727d7a94c030d8e9919e4ee62ceb Author: Ryusuke Konishi Date: Fri Feb 27 15:51:56 2015 -0800 nilfs2: fix potential memory overrun on inode commit 957ed60b53b519064a54988c4e31e0087e47d091 upstream. Each inode of nilfs2 stores a root node of a b-tree, and it turned out to have a memory overrun issue: Each b-tree node of nilfs2 stores a set of key-value pairs and the number of them (in "bn_nchildren" member of nilfs_btree_node struct), as well as a few other "bn_*" members. Since the value of "bn_nchildren" is used for operations on the key-values within the b-tree node, it can cause memory access overrun if a large number is incorrectly set to "bn_nchildren". For instance, nilfs_btree_node_lookup() function determines the range of binary search with it, and too large "bn_nchildren" leads nilfs_btree_node_get_key() in that function to overrun. As for intermediate b-tree nodes, this is prevented by a sanity check performed when each node is read from a drive, however, no sanity check has been done for root nodes stored in inodes. This patch fixes the issue by adding missing sanity check against b-tree root nodes so that it's called when on-memory inodes are read from ifile, inode metadata file. Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit f96bc2a82461e732157402aaa26b9c31bfdbdea9 Author: Ilya Nelkenbaum Date: Thu Feb 5 13:53:48 2015 +0200 IB/core: When marshaling ucma path from user-space, clear unused fields commit c2be9dc0e0fa59cc43c2c7084fc42b430809a0fe upstream. When marshaling a user path to the kernel struct ib_sa_path, we need to zero smac and dmac and set the vlan id to the "no vlan" value. This is to ensure that Ethernet attributes are not used with InfiniBand QPs. Fixes: dd5f03beb4f7 ("IB/core: Ethernet L2 attributes in verbs/cm structures") Signed-off-by: Ilya Nelkenbaum Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier Signed-off-by: Greg Kroah-Hartman commit 5ed802de91567664a3f6bc37b8b03dfad8ad88ea Author: Moshe Lazer Date: Thu Feb 5 13:53:52 2015 +0200 IB/core: Fix deadlock on uverbs modify_qp error flow commit 0fb8bcf022f19a375d7c4bd79ac513da8ae6d78b upstream. The deadlock occurs in __uverbs_modify_qp: we take a lock (idr_read_qp) and in case of failure in ib_resolve_eth_l2_attrs we don't release it (put_qp_read). Fix that. Fixes: ed4c54e5b4ba ("IB/core: Resolve Ethernet L2 addresses when modifying QP") Signed-off-by: Moshe Lazer Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier Signed-off-by: Greg Kroah-Hartman commit 374e23517787348543b907ff868e7d5e3318fa4f Author: Or Gerlitz Date: Wed Dec 17 16:17:34 2014 +0200 IB/mlx4: Fix wrong usage of IPv4 protocol for multicast attach/detach commit e9a7faf11af94957e5107b40af46c2e329541510 upstream. The MLX4_PROT_IB_IPV4 protocol should only be used with RoCEv2 and such. Removing this wrong usage allows to run multicast applications over RoCE. Fixes: d487ee77740c ("IB/mlx4: Use IBoE (RoCE) IP based GIDs in the port GID table") Reported-by: Carol Soto Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier Signed-off-by: Greg Kroah-Hartman commit 395001e5a2ab29fb564da7c9300d084848f2fdf5 Author: Mitko Haralanov Date: Fri Jan 16 08:55:27 2015 -0500 IB/qib: Do not write EEPROM commit 18c0b82a3e4501511b08d0e8676fb08ac08734a3 upstream. This changeset removes all the code that allows the driver to write to the EEPROM and update the recorded error counters and power on hours. These two stats are unused and writing them exposes a timing risk which could leave the EEPROM in a bad state preventing further normal operation of the HCA. Reviewed-by: Mike Marciniszyn Signed-off-by: Mitko Haralanov Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier Signed-off-by: Greg Kroah-Hartman commit 44fd4c139cdfaf51e68e47b69407b7d46bea36a8 Author: Tony Battersby Date: Wed Feb 11 11:32:06 2015 -0500 sg: fix read() error reporting commit 3b524a683af8991b4eab4182b947c65f0ce1421b upstream. Fix SCSI generic read() incorrectly returning success after detecting an error. Signed-off-by: Tony Battersby Acked-by: Douglas Gilbert Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman commit 01e8cc1d796728cf00739404e9135db5d6177083 Author: Takashi Iwai Date: Wed Feb 25 07:53:31 2015 +0100 ALSA: hda - Disable runtime PM for Panther Point again commit de5d0ad506cb10ab143e2ffb9def7607e3671f83 upstream. This is essentially a partial revert of the commit [b1920c21102a: 'ALSA: hda - Enable runtime PM on Panther Point']. There was a bug report showing the HD-audio bus hang during runtime PM on HP Spectre XT. Reported-by: Dang Sananikone Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit dea594a1a73dadb34d9431a9a404a140065cf726 Author: Takashi Iwai Date: Thu Feb 19 13:01:37 2015 +0100 ALSA: hda - Add pin configs for ASUS mobo with IDT 92HD73XX codec commit 6426460e5d87810e042962281fe3c1e8fc256162 upstream. BIOS doesn't seem to set up pins for 5.1 and the SPDIF out, so we need to give explicitly here. Reported-and-tested-by: Misan Thropos Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 9e09b7e8d787bffd74113754c303f3fae45b550f Author: Takashi Iwai Date: Thu Dec 18 10:02:41 2014 +0100 ALSA: pcm: Don't leave PREPARED state after draining commit 70372a7566b5e552dbe48abdac08c275081d8558 upstream. When a PCM draining is performed to an empty stream that has been already in PREPARED state, the current code just ignores and leaves as it is, although the drain is supposed to set all such streams to SETUP state. This patch covers that overlooked case. Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit a7cfc5a06d444214d6ee90ee0b22113e07ff7488 Author: Jiri Slaby Date: Fri Feb 27 18:40:31 2015 +0100 tty: fix up atime/mtime mess, take four commit f0bf0bd07943bfde8f5ac39a32664810a379c7d3 upstream. This problem was taken care of three times already in * b0de59b5733d18b0d1974a060860a8b5c1b36a2e (TTY: do not update atime/mtime on read/write), * 37b7f3c76595e23257f61bd80b223de8658617ee (TTY: fix atime/mtime regression), and * b0b885657b6c8ef63a46bc9299b2a7715d19acde (tty: fix up atime/mtime mess, take three) But it still misses one point. As John Paul correctly points out, we do not care about setting date. If somebody ever changes wall time backwards (by mistake for example), tty timestamps are never updated until the original wall time passes. So check the absolute difference of times and if it large than "8 seconds or so", always update the time. That means we will update immediatelly when changing time. Ergo, CAP_SYS_TIME can foul the check, but it was always that way. Thanks John for serving me this so nicely debugged. Signed-off-by: Jiri Slaby Reported-by: John Paul Perry Acked-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit e12348dff72867bc10ebccdcd712a3d69a436bd0 Author: Vineet Gupta Date: Fri Feb 27 10:39:17 2015 +0530 ARC: Fix KSTK_ESP() commit 13648b0118a24f4fc76c34e6c7b6ccf447e46a2a upstream. /proc//maps currently don't annotate stack vma with "[stack]" This is because KSTK_ESP ie expected to return usermode SP of tsk while currently it returns the kernel mode SP of a sleeping tsk. While the fix is trivial, we also need to adjust the ARC kernel stack unwinder to not use KSTK_SP and friends any more. Reported-and-suggested-by: Alexey Brodkin Signed-off-by: Vineet Gupta Signed-off-by: Greg Kroah-Hartman commit 136ff69491588c69f62d1b1f24060a77a5cd35d4 Author: Al Viro Date: Sat Mar 7 21:08:46 2015 +0000 sunrpc: fix braino in ->poll() commit 1711fd9addf214823b993468567cab1f8254fc51 upstream. POLL_OUT isn't what callers of ->poll() are expecting to see; it's actually __SI_POLL | 2 and it's a siginfo code, not a poll bitmap bit... Signed-off-by: Al Viro Cc: Bruce Fields Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit bef6f8ab73dce6195f2abe09421f7a389bfcfa94 Author: Al Viro Date: Sat Feb 21 22:16:11 2015 -0500 procfs: fix race between symlink removals and traversals commit 7e0e953bb0cf649f93277ac8fb67ecbb7f7b04a9 upstream. use_pde()/unuse_pde() in ->follow_link()/->put_link() resp. Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman commit 962faa265c06f9bb4d4ec6d836fb71376557ad6d Author: Al Viro Date: Sat Feb 21 22:05:11 2015 -0500 debugfs: leave freeing a symlink body until inode eviction commit 0db59e59299f0b67450c5db21f7f316c8fb04e84 upstream. As it is, we have debugfs_remove() racing with symlink traversals. Supply ->evict_inode() and do freeing there - inode will remain pinned until we are done with the symlink body. And rip the idiocy with checking if dentry is positive right after we'd verified debugfs_positive(), which is a stronger check... Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman commit 2888d04f7a8fb94cf8ed1d87aae5ff38ca42888e Author: Al Viro Date: Sat Feb 21 22:19:57 2015 -0500 autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation commit 0a280962dc6e117e0e4baa668453f753579265d9 upstream. X-Coverup: just ask spender Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman commit 656b23cafc0ea22b984fbc4331c1fa7b8740317a Author: Johan Hovold Date: Wed Feb 18 10:34:51 2015 +0700 USB: serial: fix tty-device error handling at probe commit ca4383a3947a83286bc9b9c598a1f55e867871d7 upstream. Add missing error handling when registering the tty device at port probe. This avoids trying to remove an uninitialised character device when the port device is removed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Takashi Iwai Signed-off-by: Johan Hovold Acked-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 80322a8f709005f6f944e442659b4ac308d52640 Author: Johan Hovold Date: Wed Feb 18 10:34:50 2015 +0700 USB: serial: fix potential use-after-free after failed probe commit 07fdfc5e9f1c966be8722e8fa927e5ea140df5ce upstream. Fix return value in probe error path, which could end up returning success (0) on errors. This could in turn lead to use-after-free or double free (e.g. in port_remove) when the port device is removed. Fixes: c706ebdfc895 ("USB: usb-serial: call port_probe and port_remove at the right times") Signed-off-by: Johan Hovold Acked-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 8103e16355d3b0145567e8ca08ad4736de74dc0a Author: Johan Hovold Date: Wed Mar 4 10:39:06 2015 +0100 TTY: fix tty_wait_until_sent on 64-bit machines commit 79fbf4a550ed6a22e1ae1516113e6c7fa5d56a53 upstream. Fix overflow bug in tty_wait_until_sent on 64-bit machines, where an infinite timeout (0) would be passed to the underlying tty-driver's wait_until_sent-operation as a negative timeout (-1), causing it to return immediately. This manifests itself for example as tcdrain() returning immediately, drivers not honouring the drain flags when setting terminal attributes, or even dropped data on close as a requested infinite closing-wait timeout would be ignored. The first symptom was reported by Asier LLANO who noted that tcdrain() returned prematurely when using the ftdi_sio usb-serial driver. Fix this by passing 0 rather than MAX_SCHEDULE_TIMEOUT (LONG_MAX) to the underlying tty driver. Note that the serial-core wait_until_sent-implementation is not affected by this bug due to a lucky chance (comparison to an unsigned maximum timeout), and neither is the cyclades one that had an explicit check for negative timeouts, but all other tty drivers appear to be affected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: ZIV-Asier Llano Palacios Signed-off-by: Johan Hovold Reviewed-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman commit a88e88e824e16fe34d2b98539019d3ffd0b31310 Author: Johan Hovold Date: Wed Mar 4 10:39:05 2015 +0100 USB: serial: fix infinite wait_until_sent timeout commit f528bf4f57e43d1af4b2a5c97f09e43e0338c105 upstream. Make sure to handle an infinite timeout (0). Note that wait_until_sent is currently never called with a 0-timeout argument due to a bug in tty_wait_until_sent. Fixes: dcf010503966 ("USB: serial: add generic wait_until_sent implementation") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit e590a0671fe62e6eef7df7fbe85271d7d89b68a3 Author: Johan Hovold Date: Wed Mar 4 10:39:03 2015 +0100 net: irda: fix wait_until_sent poll timeout commit 2c3fbe3cf28fbd7001545a92a83b4f8acfd9fa36 upstream. In case an infinite timeout (0) is requested, the irda wait_until_sent implementation would use a zero poll timeout rather than the default 200ms. Note that wait_until_sent is currently never called with a 0-timeout argument due to a bug in tty_wait_until_sent. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 08262109b81d7d3e0c72ad143a8f66dcdd27f111 Author: Jouni Malinen Date: Thu Feb 26 15:50:50 2015 +0200 mac80211: Send EAPOL frames at lowest rate commit 9c1c98a3bb7b7593b60264b9a07e001e68b46697 upstream. The current minstrel_ht rate control behavior is somewhat optimistic in trying to find optimum TX rate. While this is usually fine for normal Data frames, there are cases where a more conservative set of retry parameters would be beneficial to make the connection more robust. EAPOL frames are critical to the authentication and especially the EAPOL-Key message 4/4 (the last message in the 4-way handshake) is important to get through to the AP. If that message is lost, the only recovery mechanism in many cases is to reassociate with the AP and start from scratch. This can often be avoided by trying to send the frame with more conservative rate and/or with more link layer retries. In most cases, minstrel_ht is currently using the initial EAPOL-Key frames for probing higher rates and this results in only five link layer transmission attempts (one at high(ish) MCS and four at MCS0). While this works with most APs, it looks like there are some deployed APs that may have issues with the EAPOL frames using HT MCS immediately after association. Similarly, there may be issues in cases where the signal strength or radio environment is not good enough to be able to get frames through even at couple of MCS 0 tries. The best approach for this would likely to be to reduce the TX rate for the last rate (3rd rate parameter in the set) to a low basic rate (say, 6 Mbps on 5 GHz and 2 or 5.5 Mbps on 2.4 GHz), but doing that cleanly requires some more effort. For now, we can start with a simple one-liner that forces the minimum rate to be used for EAPOL frames similarly how the TX rate is selected for the IEEE 802.11 Management frames. This does result in a small extra latency added to the cases where the AP would be able to receive the higher rate, but taken into account how small number of EAPOL frames are used, this is likely to be insignificant. A future optimization in the minstrel_ht design can also allow this patch to be reverted to get back to the more optimized initial TX rate. It should also be noted that many drivers that do not use minstrel as the rate control algorithm are already doing similar workarounds by forcing the lowest TX rate to be used for EAPOL frames. Reported-by: Linus Torvalds Tested-by: Linus Torvalds Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 8ddb85838179cb34f92195182fbd1a5c7d1173c4 Author: Aleksander Morgado Date: Fri Mar 6 17:14:21 2015 +0200 xhci: fix reporting of 0-sized URBs in control endpoint commit 45ba2154d12fc43b70312198ec47085f10be801a upstream. When a control transfer has a short data stage, the xHCI controller generates two transfer events: a COMP_SHORT_TX event that specifies the untransferred amount, and a COMP_SUCCESS event. But when the data stage is not short, only the COMP_SUCCESS event occurs. Therefore, xhci-hcd must set urb->actual_length to urb->transfer_buffer_length while processing the COMP_SUCCESS event, unless urb->actual_length was set already by a previous COMP_SHORT_TX event. The driver checks this by seeing whether urb->actual_length == 0, but this alone is the wrong test, as it is entirely possible for a short transfer to have an urb->actual_length = 0. This patch changes the xhci driver to rely on a new td->urb_length_set flag, which is set to true when a COMP_SHORT_TX event is received and the URB length updated at that stage. This fixes a bug which affected the HSO plugin, which relies on URBs with urb->actual_length == 0 to halt re-submitting the RX URB in the control endpoint. Signed-off-by: Aleksander Morgado Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman commit 7f5d3228923fcec697cfc0d563eab0a690fac2b6 Author: Mathias Nyman Date: Tue Feb 24 18:27:01 2015 +0200 xhci: Allocate correct amount of scratchpad buffers commit 6596a926b0b6c80b730a1dd2fa91908e0a539c37 upstream. Include the high order bit fields for Max scratchpad buffers when calculating how many scratchpad buffers are needed. I'm suprised this hasn't caused more issues, we never allocated more than 32 buffers even if xhci needed more. Either we got lucky and xhci never really used past that area, or then we got enough zeroed dma memory anyway. Should be backported as far back as possible Reported-by: Tim Chen Tested-by: Tim Chen Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman commit caceeec3c202bb7a30b4be52548f3a1cb3ed9c13 Author: George Cherian Date: Fri Feb 13 10:13:24 2015 +0530 usb: dwc3: dwc3-omap: Fix disable IRQ commit 96e5d31244c5542f5b2ea81d76f14ba4b8a7d440 upstream. In the wrapper the IRQ disable should be done by writing 1's to the IRQ*_CLR register. Existing code is broken because it instead writes zeros to IRQ*_SET register. Fix this by adding functions dwc3_omap_write_irqmisc_clr() and dwc3_omap_write_irq0_clr() which do the right thing. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Signed-off-by: George Cherian Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman commit e35c1e74bf12668fff66fbe02b6f70f9fb7bd90f Author: Max Mansfield Date: Mon Mar 2 18:38:02 2015 -0700 usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards commit c7d373c3f0da2b2b78c4b1ce5ae41485b3ef848c upstream. This patch integrates Cyber Cortex AV boards with the existing ftdi_jtag_quirk in order to use serial port 0 with JTAG which is required by the manufacturers' software. Steps: 2 [ftdi_sio_ids.h] 1. Defined the device PID [ftdi_sio.c] 2. Added a macro declaration to the ids array, in order to enable the jtag quirk for the device. Signed-off-by: Max Mansfield Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 99997e4fd33cb36376bd50981f445dd0f5732111 Author: Mark Glover Date: Fri Feb 13 09:04:39 2015 +0000 USB: ftdi_sio: add PIDs for Actisense USB devices commit f6950344d3cf4a1e231b5828b50c4ac168db3886 upstream. These product identifiers (PID) all deal with marine NMEA format data used on motor boats and yachts. We supply the programmed devices to Chetco, for use inside their equipment. The PIDs are a direct copy of our Windows device drivers (FTDI drivers with altered PIDs). Signed-off-by: Mark Glover [johan: edit commit message slightly ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit db23dc4e4b18f389edde0ceed5e91d9bfd0aeda7 Author: Alan Stern Date: Fri Feb 13 10:54:53 2015 -0500 USB: usbfs: don't leak kernel data in siginfo commit f0c2b68198589249afd2b1f2c4e8de8c03e19c16 upstream. When a signal is delivered, the information in the siginfo structure is copied to userspace. Good security practice dicatates that the unused fields in this structure should be initialized to 0 so that random kernel stack data isn't exposed to the user. This patch adds such an initialization to the two places where usbfs raises signals. Signed-off-by: Alan Stern Reported-by: Dave Mielke Signed-off-by: Greg Kroah-Hartman commit 234d51b8f52c94568fde657f1a24f2f69db07420 Author: Johan Hovold Date: Wed Feb 18 11:51:07 2015 +0700 USB: mxuport: fix null deref when used as a console commit db81de767e375743ebb0ad2bcad3326962c2b67e upstream. Fix null-pointer dereference at probe when the device is used as a console, in which case the tty argument to open will be NULL. Fixes: ee467a1f2066 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver") Signed-off-by: Johan Hovold Acked-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 83d29ea1fb6d53a3c4d3377cc30093a31acecc38 Author: Michiel vd Garde Date: Fri Feb 27 02:08:29 2015 +0100 USB: serial: cp210x: Adding Seletek device id's commit 675af70856d7cc026be8b6ea7a8b9db10b8b38a1 upstream. These device ID's are not associated with the cp210x module currently, but should be. This patch allows the devices to operate upon connecting them to the usb bus as intended. Signed-off-by: Michiel van de Garde Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit a16f0642cca75fc126566fc70b8fe9fb4da870f1 Author: James Hogan Date: Tue Feb 24 11:46:20 2015 +0000 KVM: MIPS: Fix trace event to save PC directly commit b3cffac04eca9af46e1e23560a8ee22b1bd36d43 upstream. Currently the guest exit trace event saves the VCPU pointer to the structure, and the guest PC is retrieved by dereferencing it when the event is printed rather than directly from the trace record. This isn't safe as the printing may occur long afterwards, after the PC has changed and potentially after the VCPU has been freed. Usually this results in the same (wrong) PC being printed for multiple trace events. It also isn't portable as userland has no way to access the VCPU data structure when interpreting the trace record itself. Lets save the actual PC in the structure so that the correct value is accessible later. Fixes: 669e846e6c4e ("KVM/MIPS32: MIPS arch specific APIs for KVM") Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: Ralf Baechle Cc: Marcelo Tosatti Cc: Gleb Natapov Cc: Steven Rostedt Cc: Ingo Molnar Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Acked-by: Steven Rostedt Signed-off-by: Marcelo Tosatti Signed-off-by: Greg Kroah-Hartman commit 1a988e6acaba3a5746b8287ae24103086139f1fb Author: Paolo Bonzini Date: Thu Feb 12 17:04:47 2015 +0100 KVM: emulate: fix CMPXCHG8B on 32-bit hosts commit 4ff6f8e61eb7f96d3ca535c6d240f863ccd6fb7d upstream. This has been broken for a long time: it broke first in 2.6.35, then was almost fixed in 2.6.36 but this one-liner slipped through the cracks. The bug shows up as an infinite loop in Windows 7 (and newer) boot on 32-bit hosts without EPT. Windows uses CMPXCHG8B to write to page tables, which causes a page fault if running without EPT; the emulator is then called from kvm_mmu_page_fault. The loop then happens if the higher 4 bytes are not 0; the common case for this is that the NX bit (bit 63) is 1. Fixes: 6550e1f165f384f3a46b60a1be9aba4bc3c2adad Fixes: 16518d5ada690643453eb0aef3cc7841d3623c2d Reported-by: Erik Rull Tested-by: Erik Rull Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit de9b1dd6e7696f385b12c1a3c862c1c72214bf31 Author: Quentin Casasnovas Date: Tue Mar 3 16:31:38 2015 +0100 Btrfs:__add_inode_ref: out of bounds memory read when looking for extended ref. commit dd9ef135e3542ffc621c4eb7f0091870ec7a1504 upstream. Improper arithmetics when calculting the address of the extended ref could lead to an out of bounds memory read and kernel panic. Signed-off-by: Quentin Casasnovas Reviewed-by: David Sterba Signed-off-by: Chris Mason Signed-off-by: Greg Kroah-Hartman commit 93014d588bb73e95025705f4c64bbf0bf84d70a9 Author: Filipe Manana Date: Sun Mar 1 20:36:00 2015 +0000 Btrfs: fix data loss in the fast fsync path commit 3a8b36f378060d20062a0918e99fae39ff077bf0 upstream. When using the fast file fsync code path we can miss the fact that new writes happened since the last file fsync and therefore return without waiting for the IO to finish and write the new extents to the fsync log. Here's an example scenario where the fsync will miss the fact that new file data exists that wasn't yet durably persisted: 1. fs_info->last_trans_committed == N - 1 and current transaction is transaction N (fs_info->generation == N); 2. do a buffered write; 3. fsync our inode, this clears our inode's full sync flag, starts an ordered extent and waits for it to complete - when it completes at btrfs_finish_ordered_io(), the inode's last_trans is set to the value N (via btrfs_update_inode_fallback -> btrfs_update_inode -> btrfs_set_inode_last_trans); 4. transaction N is committed, so fs_info->last_trans_committed is now set to the value N and fs_info->generation remains with the value N; 5. do another buffered write, when this happens btrfs_file_write_iter sets our inode's last_trans to the value N + 1 (that is fs_info->generation + 1 == N + 1); 6. transaction N + 1 is started and fs_info->generation now has the value N + 1; 7. transaction N + 1 is committed, so fs_info->last_trans_committed is set to the value N + 1; 8. fsync our inode - because it doesn't have the full sync flag set, we only start the ordered extent, we don't wait for it to complete (only in a later phase) therefore its last_trans field has the value N + 1 set previously by btrfs_file_write_iter(), and so we have: inode->last_trans <= fs_info->last_trans_committed (N + 1) (N + 1) Which made us not log the last buffered write and exit the fsync handler immediately, returning success (0) to user space and resulting in data loss after a crash. This can actually be triggered deterministically and the following excerpt from a testcase I made for xfstests triggers the issue. It moves a dummy file across directories and then fsyncs the old parent directory - this is just to trigger a transaction commit, so moving files around isn't directly related to the issue but it was chosen because running 'sync' for example does more than just committing the current transaction, as it flushes/waits for all file data to be persisted. The issue can also happen at random periods, since the transaction kthread periodicaly commits the current transaction (about every 30 seconds by default). The body of the test is: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create our main test file 'foo', the one we check for data loss. # By doing an fsync against our file, it makes btrfs clear the 'needs_full_sync' # bit from its flags (btrfs inode specific flags). $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" \ -c "fsync" $SCRATCH_MNT/foo | _filter_xfs_io # Now create one other file and 2 directories. We will move this second file # from one directory to the other later because it forces btrfs to commit its # currently open transaction if we fsync the old parent directory. This is # necessary to trigger the data loss bug that affected btrfs. mkdir $SCRATCH_MNT/testdir_1 touch $SCRATCH_MNT/testdir_1/bar mkdir $SCRATCH_MNT/testdir_2 # Make sure everything is durably persisted. sync # Write more 8Kb of data to our file. $XFS_IO_PROG -c "pwrite -S 0xbb 8K 8K" $SCRATCH_MNT/foo | _filter_xfs_io # Move our 'bar' file into a new directory. mv $SCRATCH_MNT/testdir_1/bar $SCRATCH_MNT/testdir_2/bar # Fsync our first directory. Because it had a file moved into some other # directory, this made btrfs commit the currently open transaction. This is # a condition necessary to trigger the data loss bug. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir_1 # Now fsync our main test file. If the fsync succeeds, we expect the 8Kb of # data we wrote previously to be persisted and available if a crash happens. # This did not happen with btrfs, because of the transaction commit that # happened when we fsynced the parent directory. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # Now check that all data we wrote before are available. echo "File content after log replay:" od -t x1 $SCRATCH_MNT/foo status=0 exit The expected golden output for the test, which is what we get with this fix applied (or when running against ext3/4 and xfs), is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 8192/8192 bytes at offset 8192 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb * 0040000 Without this fix applied, the output shows the test file does not have the second 8Kb extent that we successfully fsynced: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 8192/8192 bytes at offset 8192 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 So fix this by skipping the fsync only if we're doing a full sync and if the inode's last_trans is <= fs_info->last_trans_committed, or if the inode is already in the log. Also remove setting the inode's last_trans in btrfs_file_write_iter since it's useless/unreliable. Also because btrfs_file_write_iter no longer sets inode->last_trans to fs_info->generation + 1, don't set last_trans to 0 if we bail out and don't bail out if last_trans is 0, otherwise something as simple as the following example wouldn't log the second write on the last fsync: 1. write to file 2. fsync file 3. fsync file |--> btrfs_inode_in_log() returns true and it set last_trans to 0 4. write to file |--> btrfs_file_write_iter() no longers sets last_trans, so it remained with a value of 0 5. fsync |--> inode->last_trans == 0, so it bails out without logging the second write A test case for xfstests will be sent soon. Signed-off-by: Filipe Manana Signed-off-by: Chris Mason Signed-off-by: Greg Kroah-Hartman commit d3decd5494369184b296698ffe597caf540944ce Author: David Sterba Date: Tue Feb 24 18:57:18 2015 +0100 btrfs: fix lost return value due to variable shadowing commit 1932b7be973b554ffe20a5bba6ffaed6fa995cdc upstream. A block-local variable stores error code but btrfs_get_blocks_direct may not return it in the end as there's a ret defined in the function scope. Fixes: d187663ef24c ("Btrfs: lock extents as we map them in DIO") Signed-off-by: David Sterba Signed-off-by: Chris Mason Signed-off-by: Greg Kroah-Hartman commit 293875f239a3813e5fca8f520ab14cb6b9308dca Author: Alexander Usyskin Date: Tue Feb 10 10:36:36 2015 +0200 mei: make device disabled on stop unconditionally commit 6c15a8516b8118eb19a59fd0bd22df41b9101c32 upstream. Set the internal device state to to disabled after hardware reset in stop flow. This will cover cases when driver was not brought to disabled state because of an error and in stop flow we wish not to retry the reset. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman commit be8a8e08a9ad0b04627b0cefec706a37e675061c Author: Angelo Compagnucci Date: Wed Feb 4 15:14:26 2015 +0100 iio:adc:mcp3422 Fix incorrect scales table commit 9e128ced3851d2802b6db870f6b2e93f449ce013 upstream. This patch fixes uncorrect order of mcp3422_scales table, the values was erroneously transposed. It removes also an unused array and a wrong comment. Signed-off-by: Angelo Compagnucci Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 21c8e9929c8bd70b317dbc3340d69ddd68f9e1bd Author: Urs Fässler Date: Mon Feb 2 17:12:23 2015 +0100 iio: ad5686: fix optional reference voltage declaration commit da019f59cb16570e78feaf10380ac65a3a06861e upstream. When not using the "_optional" function, a dummy regulator is returned and the driver fails to initialize. Signed-off-by: Urs Fässler Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit e7f3db14eacaf1993a70b1517582603dfdf34988 Author: Kristina Martšenko Date: Sun Jan 25 18:28:22 2015 +0200 iio: mxs-lradc: only update the buffer when its conversions have finished commit 89bb35e200bee745c539a96666e0792301ca40f1 upstream. Using the touchscreen while running buffered capture results in the buffer reporting lots of wrong values, often just zeros. This is because we push readings to the buffer every time a touchscreen interrupt arrives, including when the buffer's own conversions have not yet finished. So let's only push to the buffer when its conversions are ready. Signed-off-by: Kristina Martšenko Reviewed-by: Marek Vasut Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit a1c5b58e41535564b0bce1bec2bce34b2657c98c Author: Kristina Martšenko Date: Sun Jan 25 18:28:21 2015 +0200 iio: mxs-lradc: make ADC reads not unschedule touchscreen conversions commit 6abe0300a1d5242f4ff89257197f284679af1a06 upstream. Reading a channel through sysfs, or starting a buffered capture, can occasionally turn off the touchscreen. This is because the read_raw() and buffer preenable()/postdisable() callbacks unschedule current conversions on all channels. If a delay channel happens to schedule a touchscreen conversion at the same time, the conversion gets cancelled and the touchscreen sequence stops. This is probably related to this note from the reference manual: "If a delay group schedules channels to be sampled and a manual write to the schedule field in CTRL0 occurs while the block is discarding samples, the LRADC will switch to the new schedule and will not sample the channels that were previously scheduled. The time window for this to happen is very small and lasts only while the LRADC is discarding samples." So make the callbacks only unschedule conversions for the channels they use. This means channel 0 for read_raw() and channels 0-5 for the buffer (if the touchscreen is enabled). Since the touchscreen uses different channels (6 and 7), it no longer gets turned off. This is tested and fixes the issue on i.MX28, but hasn't been tested on i.MX23. Signed-off-by: Kristina Martšenko Reviewed-by: Marek Vasut Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 824ff2b93f318f764efd2cfbcdcf080fb8dca605 Author: Kristina Martšenko Date: Sun Jan 25 18:28:20 2015 +0200 iio: mxs-lradc: make ADC reads not disable touchscreen interrupts commit 86bf7f3ef7e961e91e16dceb31ae0f583483b204 upstream. Reading a channel through sysfs, or starting a buffered capture, will currently turn off the touchscreen. This is because the read_raw() and buffer preenable()/postdisable() callbacks disable interrupts for all LRADC channels, including those the touchscreen uses. So make the callbacks only disable interrupts for the channels they use. This means channel 0 for read_raw() and channels 0-5 for the buffer (if the touchscreen is enabled). Since the touchscreen uses different channels (6 and 7), it no longer gets turned off. Note that only i.MX28 is affected by this issue, i.MX23 should be fine. Signed-off-by: Kristina Martšenko Reviewed-by: Marek Vasut Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 852f7d2d09fe80646a1365d63c30c26f7b57d0f1 Author: Kristina Martšenko Date: Sun Jan 25 18:28:19 2015 +0200 iio: mxs-lradc: separate touchscreen and buffer virtual channels commit f81197b8a31b8fb287ae57f597b5b6841e1ece92 upstream. The touchscreen was initially designed [1] to map all of its physical channels to one virtual channel, leaving buffered capture to use the remaining 7 virtual channels. When the touchscreen was reimplemented [2], it was made to use four virtual channels, which overlap and conflict with the channels the buffer uses. As a result, when the buffer is enabled, the touchscreen's virtual channels are remapped to whichever physical channels the buffer was configured with, causing the touchscreen to read those instead of the touch measurement channels. Effectively the touchscreen stops working. So here we separate the channels again, giving the touchscreen 2 virtual channels and the buffer 6. We can't give the touchscreen just 1 channel as before, as the current pressure calculation requires 2 channels to be read at the same time. This makes the touchscreen continue to work during buffered capture. It has been tested on i.MX28, but not on i.MX23. [1] 06ddd353f5c8 ("iio: mxs: Implement support for touchscreen") [2] dee05308f602 ("Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection") Signed-off-by: Kristina Martšenko Reviewed-by: Marek Vasut Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 33b3078b509b4e6732922ab34359fbcab076c2a5 Author: Rasmus Villemoes Date: Fri Jan 23 00:34:02 2015 +0100 iio: imu: adis16400: Fix sign extension commit 19e353f2b344ad86cea6ebbc0002e5f903480a90 upstream. The intention is obviously to sign-extend a 12 bit quantity. But because of C's promotion rules, the assignment is equivalent to "val16 &= 0xfff;". Use the proper API for this. Signed-off-by: Rasmus Villemoes Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 5687c343154446dc620f0ac12c228c47000a40f2 Author: Stefan Wahren Date: Sat Jan 3 20:34:12 2015 +0000 iio: mxs-lradc: fix iio channel map regression commit 03305e535cd5cdc1079b32909bf4b2dd67d46f7f upstream. Since commit c8231a9af8147f8a ("iio: mxs-lradc: compute temperature from channel 8 and 9") with the removal of adc channel 9 there is no 1-1 mapping in the channel spec. All hwmon channel values above 9 are accessible via there index minus one. So add a hidden iio channel 9 to fix this issue. Signed-off-by: Stefan Wahren Acked-by: Alexandre Belloni Reviewed-by: Marek Vasut Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 213c9f19d733b067b278901acf49d67e805a38b0 Author: Andy Lutomirski Date: Thu Mar 5 01:09:44 2015 +0100 x86/asm/entry/64: Remove a bogus 'ret_from_fork' optimization commit 956421fbb74c3a6261903f3836c0740187cf038b upstream. 'ret_from_fork' checks TIF_IA32 to determine whether 'pt_regs' and the related state make sense for 'ret_from_sys_call'. This is entirely the wrong check. TS_COMPAT would make a little more sense, but there's really no point in keeping this optimization at all. This fixes a return to the wrong user CS if we came from int 0x80 in a 64-bit task. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/4710be56d76ef994ddf59087aad98c000fbab9a4.1424989793.git.luto@amacapital.net [ Backported from tip:x86/asm. ] Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 6e594e375a311e3d0336317c98809a5ba1b51ce4 Author: Nicholas Bellinger Date: Fri Feb 13 22:27:40 2015 +0000 target: Check for LBA + sectors wrap-around in sbc_parse_cdb commit aa179935edea9a64dec4b757090c8106a3907ffa upstream. This patch adds a check to sbc_parse_cdb() in order to detect when an LBA + sector vs. end-of-device calculation wraps when the LBA is sufficently large enough (eg: 0xFFFFFFFFFFFFFFFF). Cc: Martin Petersen Cc: Christoph Hellwig Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman commit 10404e6a46755a46137aa9391b76f27d8a5877fc Author: Nicholas Bellinger Date: Fri Feb 13 22:09:47 2015 +0000 target: Add missing WRITE_SAME end-of-device sanity check commit 8e575c50a171f2579e367a7f778f86477dfdaf49 upstream. This patch adds a check to sbc_setup_write_same() to verify the incoming WRITE_SAME LBA + number of blocks does not exceed past the end-of-device. Also check for potential LBA wrap-around as well. Reported-by: Bart Van Assche Cc: Martin Petersen Cc: Christoph Hellwig Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman commit bdbd61e1743a95ca06e86c79c9f59cdbded7ae7f Author: Nicholas Bellinger Date: Wed Feb 11 18:34:40 2015 -0800 target: Fix PR_APTPL_BUF_LEN buffer size limitation commit f161d4b44d7cc1dc66b53365215227db356378b1 upstream. This patch addresses the original PR_APTPL_BUF_LEN = 8k limitiation for write-out of PR APTPL metadata that Martin has recently been running into. It changes core_scsi3_update_and_write_aptpl() to use vzalloc'ed memory instead of kzalloc, and increases the default hardcoded length to 256k. It also adds logic in core_scsi3_update_and_write_aptpl() to double the original length upon core_scsi3_update_aptpl_buf() failure, and retries until the vzalloc'ed buffer is large enough to accommodate the outgoing APTPL metadata. Reported-by: Martin Svec Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman commit 0d0acab9f72ef6432e0d020c29705b7f46567188 Author: Alex Deucher Date: Thu Feb 12 00:40:58 2015 -0500 drm/radeon: fix voltage setup on hawaii commit 09b6e85fc868568e1b2820235a2a851aecbccfcc upstream. Missing parameter when fetching the real voltage values from atom. Fixes problems with dynamic clocking on certain boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=87457 Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit 66e0c230e1449b0e1ccbc7805163a7aa426fb23f Author: Christian König Date: Tue Feb 10 14:26:39 2015 +0100 drm/radeon: workaround for CP HW bug on CIK commit a9c73a0e022c33954835e66fec3cd744af90ec98 upstream. Emit the EOP twice to avoid cache flushing problems. Signed-off-by: Christian König Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit 083619feef6d690b1592217a8e47c9386395c4ac Author: Alex Deucher Date: Fri Feb 6 12:53:27 2015 -0500 drm/radeon: only enable kv/kb dpm interrupts once v3 commit 410af8d7285a0b96314845c75c39fd612b755688 upstream. Enable at init and disable on fini. Workaround for hardware problems. v2 (chk): extend commit message v3: add new function Signed-off-by: Alex Deucher Signed-off-by: Christian König (v2) Signed-off-by: Greg Kroah-Hartman commit 9db79db105f2316229803a85eec7db665f7d276c Author: Grazvydas Ignotas Date: Thu Feb 12 15:00:19 2015 -0800 mm/memory.c: actually remap enough memory commit 9cb12d7b4ccaa976f97ce0c5fd0f1b6a83bc2a75 upstream. For whatever reason, generic_access_phys() only remaps one page, but actually allows to access arbitrary size. It's quite easy to trigger large reads, like printing out large structure with gdb, which leads to a crash. Fix it by remapping correct size. Fixes: 28b2ee20c7cb ("access_process_vm device memory infrastructure") Signed-off-by: Grazvydas Ignotas Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 23933aed549b24b156eeae5ba9c94a145f482975 Author: Joonsoo Kim Date: Thu Feb 12 14:59:50 2015 -0800 mm/compaction: fix wrong order check in compact_finished() commit 372549c2a3778fd3df445819811c944ad54609ca upstream. What we want to check here is whether there is highorder freepage in buddy list of other migratetype in order to steal it without fragmentation. But, current code just checks cc->order which means allocation request order. So, this is wrong. Without this fix, non-movable synchronous compaction below pageblock order would not stopped until compaction is complete, because migratetype of most pageblocks are movable and high order freepage made by compaction is usually on movable type buddy list. There is some report related to this bug. See below link. http://www.spinics.net/lists/linux-mm/msg81666.html Although the issued system still has load spike comes from compaction, this makes that system completely stable and responsive according to his report. stress-highalloc test in mmtests with non movable order 7 allocation doesn't show any notable difference in allocation success rate, but, it shows more compaction success rate. Compaction success rate (Compaction success * 100 / Compaction stalls, %) 18.47 : 28.94 Fixes: 1fb3f8ca0e92 ("mm: compaction: capture a suitable high-order page immediately when it is made available") Signed-off-by: Joonsoo Kim Acked-by: Vlastimil Babka Reviewed-by: Zhang Yanfei Cc: Mel Gorman Cc: David Rientjes Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 040f4b16ef414f6cb8926af0c02008e88afc1db7 Author: Roman Gushchin Date: Wed Feb 11 15:28:42 2015 -0800 mm/nommu.c: fix arithmetic overflow in __vm_enough_memory() commit 8138a67a5557ffea3a21dfd6f037842d4e748513 upstream. I noticed that "allowed" can easily overflow by falling below 0, because (total_vm / 32) can be larger than "allowed". The problem occurs in OVERCOMMIT_NONE mode. In this case, a huge allocation can success and overcommit the system (despite OVERCOMMIT_NONE mode). All subsequent allocations will fall (system-wide), so system become unusable. The problem was masked out by commit c9b1d0981fcc ("mm: limit growth of 3% hardcoded other user reserve"), but it's easy to reproduce it on older kernels: 1) set overcommit_memory sysctl to 2 2) mmap() large file multiple times (with VM_SHARED flag) 3) try to malloc() large amount of memory It also can be reproduced on newer kernels, but miss-configured sysctl_user_reserve_kbytes is required. Fix this issue by switching to signed arithmetic here. Signed-off-by: Roman Gushchin Cc: Andrew Shewmaker Cc: Rik van Riel Cc: Konstantin Khlebnikov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 2ea6a268286566ddf365800ec2cbb458bedf55ab Author: Roman Gushchin Date: Wed Feb 11 15:28:39 2015 -0800 mm/mmap.c: fix arithmetic overflow in __vm_enough_memory() commit 5703b087dc8eaf47bfb399d6cf512d471beff405 upstream. I noticed, that "allowed" can easily overflow by falling below 0, because (total_vm / 32) can be larger than "allowed". The problem occurs in OVERCOMMIT_NONE mode. In this case, a huge allocation can success and overcommit the system (despite OVERCOMMIT_NONE mode). All subsequent allocations will fall (system-wide), so system become unusable. The problem was masked out by commit c9b1d0981fcc ("mm: limit growth of 3% hardcoded other user reserve"), but it's easy to reproduce it on older kernels: 1) set overcommit_memory sysctl to 2 2) mmap() large file multiple times (with VM_SHARED flag) 3) try to malloc() large amount of memory It also can be reproduced on newer kernels, but miss-configured sysctl_user_reserve_kbytes is required. Fix this issue by switching to signed arithmetic here. [akpm@linux-foundation.org: use min_t] Signed-off-by: Roman Gushchin Cc: Andrew Shewmaker Cc: Rik van Riel Cc: Konstantin Khlebnikov Reviewed-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit a4f3f96f850db69890f47984c60606a2362bee89 Author: Vlastimil Babka Date: Wed Feb 11 15:28:15 2015 -0800 mm: when stealing freepages, also take pages created by splitting buddy page commit 99592d598eca62bdbbf62b59941c189176dfc614 upstream. When studying page stealing, I noticed some weird looking decisions in try_to_steal_freepages(). The first I assume is a bug (Patch 1), the following two patches were driven by evaluation. Testing was done with stress-highalloc of mmtests, using the mm_page_alloc_extfrag tracepoint and postprocessing to get counts of how often page stealing occurs for individual migratetypes, and what migratetypes are used for fallbacks. Arguably, the worst case of page stealing is when UNMOVABLE allocation steals from MOVABLE pageblock. RECLAIMABLE allocation stealing from MOVABLE allocation is also not ideal, so the goal is to minimize these two cases. The evaluation of v2 wasn't always clear win and Joonsoo questioned the results. Here I used different baseline which includes RFC compaction improvements from [1]. I found that the compaction improvements reduce variability of stress-highalloc, so there's less noise in the data. First, let's look at stress-highalloc configured to do sync compaction, and how these patches reduce page stealing events during the test. First column is after fresh reboot, other two are reiterations of test without reboot. That was all accumulater over 5 re-iterations (so the benchmark was run 5x3 times with 5 fresh restarts). Baseline: 3.19-rc4 3.19-rc4 3.19-rc4 5-nothp-1 5-nothp-2 5-nothp-3 Page alloc extfrag event 10264225 8702233 10244125 Extfrag fragmenting 10263271 8701552 10243473 Extfrag fragmenting for unmovable 13595 17616 15960 Extfrag fragmenting unmovable placed with movable 7989 12193 8447 Extfrag fragmenting for reclaimable 658 1840 1817 Extfrag fragmenting reclaimable placed with movable 558 1677 1679 Extfrag fragmenting for movable 10249018 8682096 10225696 With Patch 1: 3.19-rc4 3.19-rc4 3.19-rc4 6-nothp-1 6-nothp-2 6-nothp-3 Page alloc extfrag event 11834954 9877523 9774860 Extfrag fragmenting 11833993 9876880 9774245 Extfrag fragmenting for unmovable 7342 16129 11712 Extfrag fragmenting unmovable placed with movable 4191 10547 6270 Extfrag fragmenting for reclaimable 373 1130 923 Extfrag fragmenting reclaimable placed with movable 302 906 738 Extfrag fragmenting for movable 11826278 9859621 9761610 With Patch 2: 3.19-rc4 3.19-rc4 3.19-rc4 7-nothp-1 7-nothp-2 7-nothp-3 Page alloc extfrag event 4725990 3668793 3807436 Extfrag fragmenting 4725104 3668252 3806898 Extfrag fragmenting for unmovable 6678 7974 7281 Extfrag fragmenting unmovable placed with movable 2051 3829 4017 Extfrag fragmenting for reclaimable 429 1208 1278 Extfrag fragmenting reclaimable placed with movable 369 976 1034 Extfrag fragmenting for movable 4717997 3659070 3798339 With Patch 3: 3.19-rc4 3.19-rc4 3.19-rc4 8-nothp-1 8-nothp-2 8-nothp-3 Page alloc extfrag event 5016183 4700142 3850633 Extfrag fragmenting 5015325 4699613 3850072 Extfrag fragmenting for unmovable 1312 3154 3088 Extfrag fragmenting unmovable placed with movable 1115 2777 2714 Extfrag fragmenting for reclaimable 437 1193 1097 Extfrag fragmenting reclaimable placed with movable 330 969 879 Extfrag fragmenting for movable 5013576 4695266 3845887 In v2 we've seen apparent regression with Patch 1 for unmovable events, this is now gone, suggesting it was indeed noise. Here, each patch improves the situation for unmovable events. Reclaimable is improved by patch 1 and then either the same modulo noise, or perhaps sligtly worse - a small price for unmovable improvements, IMHO. The number of movable allocations falling back to other migratetypes is most noisy, but it's reduced to half at Patch 2 nevertheless. These are least critical as compaction can move them around. If we look at success rates, the patches don't affect them, that didn't change. Baseline: 3.19-rc4 3.19-rc4 3.19-rc4 5-nothp-1 5-nothp-2 5-nothp-3 Success 1 Min 49.00 ( 0.00%) 42.00 ( 14.29%) 41.00 ( 16.33%) Success 1 Mean 51.00 ( 0.00%) 45.00 ( 11.76%) 42.60 ( 16.47%) Success 1 Max 55.00 ( 0.00%) 51.00 ( 7.27%) 46.00 ( 16.36%) Success 2 Min 53.00 ( 0.00%) 47.00 ( 11.32%) 44.00 ( 16.98%) Success 2 Mean 59.60 ( 0.00%) 50.80 ( 14.77%) 48.20 ( 19.13%) Success 2 Max 64.00 ( 0.00%) 56.00 ( 12.50%) 52.00 ( 18.75%) Success 3 Min 84.00 ( 0.00%) 82.00 ( 2.38%) 78.00 ( 7.14%) Success 3 Mean 85.60 ( 0.00%) 82.80 ( 3.27%) 79.40 ( 7.24%) Success 3 Max 86.00 ( 0.00%) 83.00 ( 3.49%) 80.00 ( 6.98%) Patch 1: 3.19-rc4 3.19-rc4 3.19-rc4 6-nothp-1 6-nothp-2 6-nothp-3 Success 1 Min 49.00 ( 0.00%) 44.00 ( 10.20%) 44.00 ( 10.20%) Success 1 Mean 51.80 ( 0.00%) 46.00 ( 11.20%) 45.80 ( 11.58%) Success 1 Max 54.00 ( 0.00%) 49.00 ( 9.26%) 49.00 ( 9.26%) Success 2 Min 58.00 ( 0.00%) 49.00 ( 15.52%) 48.00 ( 17.24%) Success 2 Mean 60.40 ( 0.00%) 51.80 ( 14.24%) 50.80 ( 15.89%) Success 2 Max 63.00 ( 0.00%) 54.00 ( 14.29%) 55.00 ( 12.70%) Success 3 Min 84.00 ( 0.00%) 81.00 ( 3.57%) 79.00 ( 5.95%) Success 3 Mean 85.00 ( 0.00%) 81.60 ( 4.00%) 79.80 ( 6.12%) Success 3 Max 86.00 ( 0.00%) 82.00 ( 4.65%) 82.00 ( 4.65%) Patch 2: 3.19-rc4 3.19-rc4 3.19-rc4 7-nothp-1 7-nothp-2 7-nothp-3 Success 1 Min 50.00 ( 0.00%) 44.00 ( 12.00%) 39.00 ( 22.00%) Success 1 Mean 52.80 ( 0.00%) 45.60 ( 13.64%) 42.40 ( 19.70%) Success 1 Max 55.00 ( 0.00%) 46.00 ( 16.36%) 47.00 ( 14.55%) Success 2 Min 52.00 ( 0.00%) 48.00 ( 7.69%) 45.00 ( 13.46%) Success 2 Mean 53.40 ( 0.00%) 49.80 ( 6.74%) 48.80 ( 8.61%) Success 2 Max 57.00 ( 0.00%) 52.00 ( 8.77%) 52.00 ( 8.77%) Success 3 Min 84.00 ( 0.00%) 81.00 ( 3.57%) 79.00 ( 5.95%) Success 3 Mean 85.00 ( 0.00%) 82.40 ( 3.06%) 79.60 ( 6.35%) Success 3 Max 86.00 ( 0.00%) 83.00 ( 3.49%) 80.00 ( 6.98%) Patch 3: 3.19-rc4 3.19-rc4 3.19-rc4 8-nothp-1 8-nothp-2 8-nothp-3 Success 1 Min 46.00 ( 0.00%) 44.00 ( 4.35%) 42.00 ( 8.70%) Success 1 Mean 50.20 ( 0.00%) 45.60 ( 9.16%) 44.00 ( 12.35%) Success 1 Max 52.00 ( 0.00%) 47.00 ( 9.62%) 47.00 ( 9.62%) Success 2 Min 53.00 ( 0.00%) 49.00 ( 7.55%) 48.00 ( 9.43%) Success 2 Mean 55.80 ( 0.00%) 50.60 ( 9.32%) 49.00 ( 12.19%) Success 2 Max 59.00 ( 0.00%) 52.00 ( 11.86%) 51.00 ( 13.56%) Success 3 Min 84.00 ( 0.00%) 80.00 ( 4.76%) 79.00 ( 5.95%) Success 3 Mean 85.40 ( 0.00%) 81.60 ( 4.45%) 80.40 ( 5.85%) Success 3 Max 87.00 ( 0.00%) 83.00 ( 4.60%) 82.00 ( 5.75%) While there's no improvement here, I consider reduced fragmentation events to be worth on its own. Patch 2 also seems to reduce scanning for free pages, and migrations in compaction, suggesting it has somewhat less work to do: Patch 1: Compaction stalls 4153 3959 3978 Compaction success 1523 1441 1446 Compaction failures 2630 2517 2531 Page migrate success 4600827 4943120 5104348 Page migrate failure 19763 16656 17806 Compaction pages isolated 9597640 10305617 10653541 Compaction migrate scanned 77828948 86533283 87137064 Compaction free scanned 517758295 521312840 521462251 Compaction cost 5503 5932 6110 Patch 2: Compaction stalls 3800 3450 3518 Compaction success 1421 1316 1317 Compaction failures 2379 2134 2201 Page migrate success 4160421 4502708 4752148 Page migrate failure 19705 14340 14911 Compaction pages isolated 8731983 9382374 9910043 Compaction migrate scanned 98362797 96349194 98609686 Compaction free scanned 496512560 469502017 480442545 Compaction cost 5173 5526 5811 As with v2, /proc/pagetypeinfo appears unaffected with respect to numbers of unmovable and reclaimable pageblocks. Configuring the benchmark to allocate like THP page fault (i.e. no sync compaction) gives much noisier results for iterations 2 and 3 after reboot. This is not so surprising given how [1] offers lower improvements in this scenario due to less restarts after deferred compaction which would change compaction pivot. Baseline: 3.19-rc4 3.19-rc4 3.19-rc4 5-thp-1 5-thp-2 5-thp-3 Page alloc extfrag event 8148965 6227815 6646741 Extfrag fragmenting 8147872 6227130 6646117 Extfrag fragmenting for unmovable 10324 12942 15975 Extfrag fragmenting unmovable placed with movable 5972 8495 10907 Extfrag fragmenting for reclaimable 601 1707 2210 Extfrag fragmenting reclaimable placed with movable 520 1570 2000 Extfrag fragmenting for movable 8136947 6212481 6627932 Patch 1: 3.19-rc4 3.19-rc4 3.19-rc4 6-thp-1 6-thp-2 6-thp-3 Page alloc extfrag event 8345457 7574471 7020419 Extfrag fragmenting 8343546 7573777 7019718 Extfrag fragmenting for unmovable 10256 18535 30716 Extfrag fragmenting unmovable placed with movable 6893 11726 22181 Extfrag fragmenting for reclaimable 465 1208 1023 Extfrag fragmenting reclaimable placed with movable 353 996 843 Extfrag fragmenting for movable 8332825 7554034 6987979 Patch 2: 3.19-rc4 3.19-rc4 3.19-rc4 7-thp-1 7-thp-2 7-thp-3 Page alloc extfrag event 3512847 3020756 2891625 Extfrag fragmenting 3511940 3020185 2891059 Extfrag fragmenting for unmovable 9017 6892 6191 Extfrag fragmenting unmovable placed with movable 1524 3053 2435 Extfrag fragmenting for reclaimable 445 1081 1160 Extfrag fragmenting reclaimable placed with movable 375 918 986 Extfrag fragmenting for movable 3502478 3012212 2883708 Patch 3: 3.19-rc4 3.19-rc4 3.19-rc4 8-thp-1 8-thp-2 8-thp-3 Page alloc extfrag event 3181699 3082881 2674164 Extfrag fragmenting 3180812 3082303 2673611 Extfrag fragmenting for unmovable 1201 4031 4040 Extfrag fragmenting unmovable placed with movable 974 3611 3645 Extfrag fragmenting for reclaimable 478 1165 1294 Extfrag fragmenting reclaimable placed with movable 387 985 1030 Extfrag fragmenting for movable 3179133 3077107 2668277 The improvements for first iteration are clear, the rest is much noisier and can appear like regression for Patch 1. Anyway, patch 2 rectifies it. Allocation success rates are again unaffected so there's no point in making this e-mail any longer. [1] http://marc.info/?l=linux-mm&m=142166196321125&w=2 This patch (of 3): When __rmqueue_fallback() is called to allocate a page of order X, it will find a page of order Y >= X of a fallback migratetype, which is different from the desired migratetype. With the help of try_to_steal_freepages(), it may change the migratetype (to the desired one) also of: 1) all currently free pages in the pageblock containing the fallback page 2) the fallback pageblock itself 3) buddy pages created by splitting the fallback page (when Y > X) These decisions take the order Y into account, as well as the desired migratetype, with the goal of preventing multiple fallback allocations that could e.g. distribute UNMOVABLE allocations among multiple pageblocks. Originally, decision for 1) has implied the decision for 3). Commit 47118af076f6 ("mm: mmzone: MIGRATE_CMA migration type added") changed that (probably unintentionally) so that the buddy pages in case 3) are always changed to the desired migratetype, except for CMA pageblocks. Commit fef903efcf0c ("mm/page_allo.c: restructure free-page stealing code and fix a bug") did some refactoring and added a comment that the case of 3) is intended. Commit 0cbef29a7821 ("mm: __rmqueue_fallback() should respect pageblock type") removed the comment and tried to restore the original behavior where 1) implies 3), but due to the previous refactoring, the result is instead that only 2) implies 3) - and the conditions for 2) are less frequently met than conditions for 1). This may increase fragmentation in situations where the code decides to steal all free pages from the pageblock (case 1)), but then gives back the buddy pages produced by splitting. This patch restores the original intended logic where 1) implies 3). During testing with stress-highalloc from mmtests, this has shown to decrease the number of events where UNMOVABLE and RECLAIMABLE allocations steal from MOVABLE pageblocks, which can lead to permanent fragmentation. In some cases it has increased the number of events when MOVABLE allocations steal from UNMOVABLE or RECLAIMABLE pageblocks, but these are fixable by sync compaction and thus less harmful. Note that evaluation has shown that the behavior introduced by 47118af076f6 for buddy pages in case 3) is actually even better than the original logic, so the following patch will introduce it properly once again. For stable backports of this patch it makes thus sense to only fix versions containing 0cbef29a7821. [iamjoonsoo.kim@lge.com: tracepoint fix] Signed-off-by: Vlastimil Babka Acked-by: Mel Gorman Cc: Zhang Yanfei Acked-by: Minchan Kim Cc: David Rientjes Cc: Rik van Riel Cc: "Aneesh Kumar K.V" Cc: "Kirill A. Shutemov" Cc: Johannes Weiner Cc: Joonsoo Kim Cc: Michal Hocko Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 99537c232b32546270cba24824e56a7cfe19b6d8 Author: Naoya Horiguchi Date: Wed Feb 11 15:25:32 2015 -0800 mm/hugetlb: add migration entry check in __unmap_hugepage_range commit 9fbc1f635fd0bd28cb32550211bf095753ac637a upstream. If __unmap_hugepage_range() tries to unmap the address range over which hugepage migration is on the way, we get the wrong page because pte_page() doesn't work for migration entries. This patch simply clears the pte for migration entries as we do for hwpoison entries. Fixes: 290408d4a2 ("hugetlb: hugepage migration core") Signed-off-by: Naoya Horiguchi Cc: Hugh Dickins Cc: James Hogan Cc: David Rientjes Cc: Mel Gorman Cc: Johannes Weiner Cc: Michal Hocko Cc: Rik van Riel Cc: Andrea Arcangeli Cc: Luiz Capitulino Cc: Nishanth Aravamudan Cc: Lee Schermerhorn Cc: Steve Capper Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit d0fc2ca5a30e489a7b723addd1bfc072f11bfe20 Author: Naoya Horiguchi Date: Wed Feb 11 15:25:28 2015 -0800 mm/hugetlb: add migration/hwpoisoned entry check in hugetlb_change_protection commit a8bda28d87c38c6aa93de28ba5d30cc18e865a11 upstream. There is a race condition between hugepage migration and change_protection(), where hugetlb_change_protection() doesn't care about migration entries and wrongly overwrites them. That causes unexpected results like kernel crash. HWPoison entries also can cause the same problem. This patch adds is_hugetlb_entry_(migration|hwpoisoned) check in this function to do proper actions. Fixes: 290408d4a2 ("hugetlb: hugepage migration core") Signed-off-by: Naoya Horiguchi Cc: Hugh Dickins Cc: James Hogan Cc: David Rientjes Cc: Mel Gorman Cc: Johannes Weiner Cc: Michal Hocko Cc: Rik van Riel Cc: Andrea Arcangeli Cc: Luiz Capitulino Cc: Nishanth Aravamudan Cc: Lee Schermerhorn Cc: Steve Capper Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 67b58fb7d3e7b1e393609e14d95d02a14d7328db Author: Jiri Pirko Date: Wed Mar 4 08:36:31 2015 +0100 team: don't traverse port list using rcu in team_set_mac_address [ Upstream commit 9215f437b85da339a7dfe3db6e288637406f88b2 ] Currently the list is traversed using rcu variant. That is not correct since dev_set_mac_address can be called which eventually calls rtmsg_ifinfo_build_skb and there, skb allocation can sleep. So fix this by remove the rcu usage here. Fixes: 3d249d4ca7 "net: introduce ethernet teaming device" Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit f15e90f9f297c4c2c22de0f5b8530cb9fe62f263 Author: Lorenzo Colitti Date: Tue Mar 3 23:16:16 2015 +0900 net: ping: Return EAFNOSUPPORT when appropriate. [ Upstream commit 9145736d4862145684009d6a72a6e61324a9439e ] 1. For an IPv4 ping socket, ping_check_bind_addr does not check the family of the socket address that's passed in. Instead, make it behave like inet_bind, which enforces either that the address family is AF_INET, or that the family is AF_UNSPEC and the address is 0.0.0.0. 2. For an IPv6 ping socket, ping_check_bind_addr returns EINVAL if the socket family is not AF_INET6. Return EAFNOSUPPORT instead, for consistency with inet6_bind. 3. Make ping_v4_sendmsg and ping_v6_sendmsg return EAFNOSUPPORT instead of EINVAL if an incorrect socket address structure is passed in. 4. Make IPv6 ping sockets be IPv6-only. The code does not support IPv4, and it cannot easily be made to support IPv4 because the protocol numbers for ICMP and ICMPv6 are different. This makes connect(::ffff:192.0.2.1) fail with EAFNOSUPPORT instead of making the socket unusable. Among other things, this fixes an oops that can be triggered by: int s = socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP); struct sockaddr_in6 sin6 = { .sin6_family = AF_INET6, .sin6_addr = in6addr_any, }; bind(s, (struct sockaddr *) &sin6, sizeof(sin6)); Change-Id: If06ca86d9f1e4593c0d6df174caca3487c57a241 Signed-off-by: Lorenzo Colitti Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 8a0cafc9a8131cc545dc9924aed38f7176ee4ad7 Author: Michal Kubeček Date: Mon Mar 2 18:27:11 2015 +0100 udp: only allow UFO for packets from SOCK_DGRAM sockets [ Upstream commit acf8dd0a9d0b9e4cdb597c2f74802f79c699e802 ] If an over-MTU UDP datagram is sent through a SOCK_RAW socket to a UFO-capable device, ip_ufo_append_data() sets skb->ip_summed to CHECKSUM_PARTIAL unconditionally as all GSO code assumes transport layer checksum is to be computed on segmentation. However, in this case, skb->csum_start and skb->csum_offset are never set as raw socket transmit path bypasses udp_send_skb() where they are usually set. As a result, driver may access invalid memory when trying to calculate the checksum and store the result (as observed in virtio_net driver). Moreover, the very idea of modifying the userspace provided UDP header is IMHO against raw socket semantics (I wasn't able to find a document clearly stating this or the opposite, though). And while allowing CHECKSUM_NONE in the UFO case would be more efficient, it would be a bit too intrusive change just to handle a corner case like this. Therefore disallowing UFO for packets from SOCK_DGRAM seems to be the best option. Signed-off-by: Michal Kubecek Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 37aa4dd0a138bc88e42ca02a909367b12042fddf Author: Ben Shelton Date: Mon Feb 16 13:47:06 2015 -0600 usb: plusb: Add support for National Instruments host-to-host cable [ Upstream commit 42c972a1f390e3bc51ca1e434b7e28764992067f ] The National Instruments USB Host-to-Host Cable is based on the Prolific PL-25A1 chipset. Add its VID/PID so the plusb driver will recognize it. Signed-off-by: Ben Shelton Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 00ecb618250e0f9369ced3c980becd79f9b6c1f9 Author: Eric Dumazet Date: Fri Feb 27 18:35:35 2015 -0800 macvtap: make sure neighbour code can push ethernet header [ Upstream commit 2f1d8b9e8afa5a833d96afcd23abcb8cdf8d83ab ] Brian reported crashes using IPv6 traffic with macvtap/veth combo. I tracked the crashes in neigh_hh_output() -> memcpy(skb->data - HH_DATA_MOD, hh->hh_data, HH_DATA_MOD); Neighbour code assumes headroom to push Ethernet header is at least 16 bytes. It appears macvtap has only 14 bytes available on arches where NET_IP_ALIGN is 0 (like x86) Effect is a corruption of 2 bytes right before skb->head, and possible crashes if accessing non existing memory. This fix should also increase IPv4 performance, as paranoid code in ip_finish_output2() wont have to call skb_realloc_headroom() Reported-by: Brian Rak Tested-by: Brian Rak Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit a382f4b25c5d2a3028e73957bb2ff3ad17686b2f Author: Catalin Marinas Date: Mon Feb 23 18:12:56 2015 +0000 net: compat: Ignore MSG_CMSG_COMPAT in compat_sys_{send, recv}msg [ Upstream commit d720d8cec563ce4e4fa44a613d4f2dcb1caf2998 ] With commit a7526eb5d06b (net: Unbreak compat_sys_{send,recv}msg), the MSG_CMSG_COMPAT flag is blocked at the compat syscall entry points, changing the kernel compat behaviour from the one before the commit it was trying to fix (1be374a0518a, net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg). On 32-bit kernels (!CONFIG_COMPAT), MSG_CMSG_COMPAT is 0 and the native 32-bit sys_sendmsg() allows flag 0x80000000 to be set (it is ignored by the kernel). However, on a 64-bit kernel, the compat ABI is different with commit a7526eb5d06b. This patch changes the compat_sys_{send,recv}msg behaviour to the one prior to commit 1be374a0518a. The problem was found running 32-bit LTP (sendmsg01) binary on an arm64 kernel. Arguably, LTP should not pass 0xffffffff as flags to sendmsg() but the general rule is not to break user ABI (even when the user behaviour is not entirely sane). Fixes: a7526eb5d06b (net: Unbreak compat_sys_{send,recv}msg) Cc: Andy Lutomirski Cc: David S. Miller Signed-off-by: Catalin Marinas Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit fdb35e5a1be06aa0d37dbdc7a987a792011c8bf9 Author: Jiri Pirko Date: Mon Feb 23 14:02:54 2015 +0100 team: fix possible null pointer dereference in team_handle_frame [ Upstream commit 57e595631904c827cfa1a0f7bbd7cc9a49da5745 ] Currently following race is possible in team: CPU0 CPU1 team_port_del team_upper_dev_unlink priv_flags &= ~IFF_TEAM_PORT team_handle_frame team_port_get_rcu team_port_exists priv_flags & IFF_TEAM_PORT == 0 return NULL (instead of port got from rx_handler_data) netdev_rx_handler_unregister The thing is that the flag is removed before rx_handler is unregistered. If team_handle_frame is called in between, team_port_exists returns 0 and team_port_get_rcu will return NULL. So do not check the flag here. It is guaranteed by netdev_rx_handler_unregister that team_handle_frame will always see valid rx_handler_data pointer. Signed-off-by: Jiri Pirko Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit f0bde5010b45ca740b3db4e99fee46f10df23f4b Author: Matthew Thode Date: Tue Feb 17 18:31:57 2015 -0600 net: reject creation of netdev names with colons [ Upstream commit a4176a9391868bfa87705bcd2e3b49e9b9dd2996 ] colons are used as a separator in netdev device lookup in dev_ioctl.c Specific functions are SIOCGIFTXQLEN SIOCETHTOOL SIOCSIFNAME Signed-off-by: Matthew Thode Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 96c65236248aefab6d78b279ca2dc7fd8fa952ef Author: Ignacy Gawędzki Date: Tue Feb 17 20:15:20 2015 +0100 ematch: Fix auto-loading of ematch modules. [ Upstream commit 34eea79e2664b314cab6a30fc582fdfa7a1bb1df ] In tcf_em_validate(), after calling request_module() to load the kind-specific module, set em->ops to NULL before returning -EAGAIN, so that module_put() is not called again by tcf_em_tree_destroy(). Signed-off-by: Ignacy Gawędzki Acked-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 058969ab33db1707538ad6472964423b8115d642 Author: Guenter Roeck Date: Tue Feb 17 09:36:22 2015 -0800 net: phy: Fix verification of EEE support in phy_init_eee [ Upstream commit 54da5a8be3c1e924c35480eb44c6e9b275f6444e ] phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex) to find a valid entry in the settings array for the given speed and duplex value. For full duplex 1000baseT, this will return the first matching entry, which is the entry for 1000baseKX_Full. If the phy eee does not support 1000baseKX_Full, this entry will not match, causing phy_init_eee to fail for no good reason. Fixes: 9a9c56cb34e6 ("net: phy: fix a bug when verify the EEE support") Fixes: 3e7077067e80c ("phy: Expand phy speed/duplex settings array") Cc: Giuseppe Cavallaro Signed-off-by: Guenter Roeck Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 7ac8d452304d59f204b529cceb6c643982fb7aa4 Author: Alexander Drozdov Date: Thu Mar 5 10:29:39 2015 +0300 ipv4: ip_check_defrag should not assume that skb_network_offset is zero [ Upstream commit 3e32e733d1bbb3f227259dc782ef01d5706bdae0 ] ip_check_defrag() may be used by af_packet to defragment outgoing packets. skb_network_offset() of af_packet's outgoing packets is not zero. Signed-off-by: Alexander Drozdov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 0b04f65d11c1889908fd7594cbd015bcd2c640dd Author: Alexander Drozdov Date: Tue Feb 17 13:33:46 2015 +0300 ipv4: ip_check_defrag should correctly check return value of skb_copy_bits [ Upstream commit fba04a9e0c869498889b6445fd06cbe7da9bb834 ] skb_copy_bits() returns zero on success and negative value on error, so it is needed to invert the condition in ip_check_defrag(). Fixes: 1bf3751ec90c ("ipv4: ip_check_defrag must not modify skb before unsharing") Signed-off-by: Alexander Drozdov Acked-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit f1796b116e46cd8c341e9b08d8aa1f3d5cc6f818 Author: Ignacy Gawędzki Date: Fri Feb 13 14:47:05 2015 -0800 gen_stats.c: Duplicate xstats buffer for later use [ Upstream commit 1c4cff0cf55011792125b6041bc4e9713e46240f ] The gnet_stats_copy_app() function gets called, more often than not, with its second argument a pointer to an automatic variable in the caller's stack. Therefore, to avoid copying garbage afterwards when calling gnet_stats_finish_copy(), this data is better copied to a dynamically allocated memory that gets freed after use. [xiyou.wangcong@gmail.com: remove a useless kfree()] Signed-off-by: Ignacy Gawędzki Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit b830ba60e4ccd5d53c4746a9c3c7283511628b5f Author: WANG Cong Date: Fri Feb 13 13:56:53 2015 -0800 rtnetlink: call ->dellink on failure when ->newlink exists [ Upstream commit 7afb8886a05be68e376655539a064ec672de8a8e ] Ignacy reported that when eth0 is down and add a vlan device on top of it like: ip link add link eth0 name eth0.1 up type vlan id 1 We will get a refcount leak: unregister_netdevice: waiting for eth0.1 to become free. Usage count = 2 The problem is when rtnl_configure_link() fails in rtnl_newlink(), we simply call unregister_device(), but for stacked device like vlan, we almost do nothing when we unregister the upper device, more work is done when we unregister the lower device, so call its ->dellink(). Reported-by: Ignacy Gawedzki Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 8f9239642af2f19f57f0eda626e9b6138141a2e1 Author: Martin KaFai Lau Date: Thu Feb 12 16:14:08 2015 -0800 ipv6: fix ipv6_cow_metrics for non DST_HOST case [ Upstream commit 3b4711757d7903ab6fa88a9e7ab8901b8227da60 ] ipv6_cow_metrics() currently assumes only DST_HOST routes require dynamic metrics allocation from inetpeer. The assumption breaks when ndisc discovered router with RTAX_MTU and RTAX_HOPLIMIT metric. Refer to ndisc_router_discovery() in ndisc.c and note that dst_metric_set() is called after the route is created. This patch creates the metrics array (by calling dst_cow_metrics_generic) in ipv6_cow_metrics(). Test: radvd.conf: interface qemubr0 { AdvLinkMTU 1300; AdvCurHopLimit 30; prefix fd00:face:face:face::/64 { AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; }; Before: [root@qemu1 ~]# ip -6 r show | egrep -v unreachable fd00:face:face:face::/64 dev eth0 proto kernel metric 256 expires 27sec fe80::/64 dev eth0 proto kernel metric 256 default via fe80::74df:d0ff:fe23:8ef2 dev eth0 proto ra metric 1024 expires 27sec After: [root@qemu1 ~]# ip -6 r show | egrep -v unreachable fd00:face:face:face::/64 dev eth0 proto kernel metric 256 expires 27sec mtu 1300 fe80::/64 dev eth0 proto kernel metric 256 mtu 1300 default via fe80::74df:d0ff:fe23:8ef2 dev eth0 proto ra metric 1024 expires 27sec mtu 1300 hoplimit 30 Fixes: 8e2ec639173f325 (ipv6: don't use inetpeer to store metrics for routes.) Signed-off-by: Martin KaFai Lau Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 07e756eaedd913394a59d2a289f9808437e6327c Author: Daniel Borkmann Date: Thu Feb 5 18:44:04 2015 +0100 rtnetlink: ifla_vf_policy: fix misuses of NLA_BINARY [ Upstream commit 364d5716a7adb91b731a35765d369602d68d2881 ] ifla_vf_policy[] is wrong in advertising its individual member types as NLA_BINARY since .type = NLA_BINARY in combination with .len declares the len member as *max* attribute length [0, len]. The issue is that when do_setvfinfo() is being called to set up a VF through ndo handler, we could set corrupted data if the attribute length is less than the size of the related structure itself. The intent is exactly the opposite, namely to make sure to pass at least data of minimum size of len. Fixes: ebc08a6f47ee ("rtnetlink: Add VF config code to rtnetlink") Cc: Mitch Williams Cc: Jeff Kirsher Signed-off-by: Daniel Borkmann Acked-by: Thomas Graf Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit dfef467f6ee2dee5080a4daaa744a7744b14b2e6 Author: Sabrina Dubroca Date: Wed Feb 4 23:08:50 2015 +0100 pktgen: fix UDP checksum computation [ Upstream commit 7744b5f3693cc06695cb9d6667671c790282730f ] This patch fixes two issues in UDP checksum computation in pktgen. First, the pseudo-header uses the source and destination IP addresses. Currently, the ports are used for IPv4. Second, the UDP checksum covers both header and data. So we need to generate the data earlier (move pktgen_finalize_skb up), and compute the checksum for UDP header + data. Fixes: c26bf4a51308c ("pktgen: Add UDPCSUM flag to support UDP checksums") Signed-off-by: Sabrina Dubroca Acked-by: Thomas Graf Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman